Abstract:Significant reduction of the water content of traditional absorbents, increasing organic character of absorbent molecules, and substitution of water with a non-aqueous diluent are increasingly attracting interest as means to improve absorbent performance. From our previous work, the novel diamine absorbents N,N-dimethyl-1,3-propanediamine (DMPDA) and N,N-dimethyl-1,2-ethanediamine (DMEDA), also utilizing N-methyl-2-pyrrolidone (NMP) as a non-aqueous diluent to reduce the water content of the absorbent, were demonstrated to produce an absorbent blend with a significantly lower overall energy consumption (for CO2 regeneration). Alongside the thermodynamic performance, CO2 absorption mass transfer plays an equally critical role in the overall performance of an absorbent for CO2 capture processes. Gaining an understanding of the fundamental factors influencing mass transfer behavior has long been the focus of research efforts, and the diffusivity of the absorbent molecules is a critical factor for amines to be able to rapidly react with CO2. Expanding on the initial investigation of these promising blends, we evaluate herein the diffusivity of the component molecules of a number of blends as a function of temperature, CO2 loading, absorbent composition, and absorbent viscosity. A powerful technique based on nuclear magnetic resonance (NMR) spectroscopy was used to provide direct measurement of the diffusion coefficients of individual chemical species in the blends. Diffusivity and viscosity were found to behave very differently in water-lean and aqueous blends, with water-lean blends being particularly sensitive to CO2 loading and water content. The hydrodynamic radii of species in the water-lean blends were particularly sensitive to temperature relative to the aqueous blends, significantly decreasing as the temperature was increased with associated potential mass transfer benefits. This can be put down to the introduction of NMP, which weakens the intermolecular interactions (forming a hydrogen bond) between molecules and water, and this impact increased through increasing temperature. This highlights that the optimal operating conditions for water-lean blends are likely quite different to those used traditionally for aqueous blends.

Study of New Blended Chemical Absorbents to Absorb CO2

Deciphering the Transfer Mechanisms for CO2 Absorption into Binary Blended Solutions

Study on CO2 Absorption-Mineralization Characteristics of Mixed Amine Solution Coupled with CaO and Key Influencing Factors in Mineralization Process

[Experimental Study on CO2 Absorption by Aqueous Ammonia-Based Blended Absorbent].

Hybrid Behaviors of CO2 Absorption into Blended DEEA‐based Solution for the Improvement of Capture Performance

Research of Novel Polyamine-Based Biphasic Absorbents for CO2 Capture Using Alkanolamine to Regulate the Viscosity and Mechanism Analysis

Investigation on CO2 Capture Performance of Low-Viscosity Diamine Non-Aqueous Absorbents with N-methyldiethanolamine Regulation

Optimization of Blended Amines for Co2 Absorption in A Hollow-Fiber Membrane Contactor

Study on CO2 Absorption and Regeneration Property of Flue Gas from Methyldiethanolamine-Amine Mixture System

Research of novel polyamine-based biphasic absorbents for CO 2 capture using alkanolamine to regulate the viscosity and mechanism analysis

Synergistic effect of blended amines on carbon dioxide absorption: Thermodynamic modeling and analysis of regeneration energy

A Novel Diamine Non-Aqueous Absorbent Based on N-methyl diethanolamine Regulation for Energy-efficient CO2 Capture

Mechanism and Kinetic Study of Carbon Dioxide Absorption into a Methyldiethanolamine/1-Hydroxyethyl-3-methylimidazolium Lysine/Water System

Mechanism and Kinetics Study of CO2 Absorption into Blends of N-Methyldiethanolamine and 1-Hydroxyethyl-3-methylimidazolium Glycine Aqueous Solution

Absorption of Carbon Dioxide with Aqueous Blends of 2-Amino-2-methyl-1-propanol and Sodium Glycinate.

Mixed Amine Absorbent based on Hollow Fiber Membrane Contactor Removes CO2 from Flue Gas

Regulating the absorption and solid regeneration performance of a novel anhydrous solid–liquid phase change absorbent for carbon capture

Design and performance evaluation of low-volatility and low-viscosity absorbents for CO2 capture

Performance of CO2 Absorption in Mixed Aqueous Solution of MDEA and Amino Acid Ionic Liquids

Absorption of carbon dioxide in mixture of N-Methyl-2-Pyrrolidone and six different chemical solvents

Diffusivity in Novel Diamine-Based Water-Lean Absorbent Systems for CO<sub>2</sub> Capture Applications