Abstract:Chemical absorption using aqueous amine-based solutions is the leading method for large-scale CO2 capture in industrial plants. This technology, however, still faces many challenges, in particular the high-energy requirements for solvent regeneration, which limit the economic viability of the technology. To guide the development of more energy-efficient amine solvents, this work studied the effect of molecular characteristics of diamines, including carbon chain length and type of amino functional group, on CO2 absorption and desorption performances. Six linear terminal diamines [NH2CH2C2-R, where R = NH2, NHCH3, N(CH3)(2), CH2NH2, CH2NHCH3, and CH2N(NH3)(2)] were investigated, and two monoamines, monoethanolamine (NH2CH2CH2OH, MEA) and 3-aminopropanol (NH2CH2CH2CH2OH, 3AP), were also tested as benchmarks. The CO2 absorption capacity in each amine was measured at 40 degrees C under atmospheric pressure using different CO2 gas partial pressures. C-13 and H-1 nuclear magnetic resonance spectroscopies were used to identify and quantify species present in the CO2-amineH(2)O system. Computational modeling was also carried out using Gaussian software to explain the effect of the chain length change on the stability of monocarbamate. The experimental results showed that the chain length extension from C-2 to C-3 led to a higher CO2 absorption capacity and more bicarbonate formation during the CO2 absorption process, and the computational study results supported this conclusion. In addition, the experimental results also demonstrated that increasing the substitution on one N atom in the tested diamines is favorable for a higher CO2 absorption capacity and more bicarbonate formation under a CO2 partial pressure of 101 kPa. Both chain length extension from C-2 to C-3 and an increase in the number of substituents on one N atom yield better performance in the CO2 desorption with regard to the CO2 higher cyclic capacity and faster initial CO2 release rate for the tested amines.

Synergistic effect of blended amines on carbon dioxide absorption: Thermodynamic modeling and analysis of regeneration energy

Hybrid Behaviors of CO2 Absorption into Blended DEEA‐based Solution for the Improvement of Capture Performance

Optimization of Blended Amines for Co2 Absorption in A Hollow-Fiber Membrane Contactor

An Interactive Chemical Enhancement of CO2 Capture in the MEA/PZ/AMP/DEA Binary Solutions

Novel Tri-Solvent Amines Absorption for Flue Gas CO2 Capture: Efficient Absorption and Regeneration with Low Energy Consumption

Toward Efficient CO2 Capture Solvent Design by Analyzing the Effect of Chain Lengths and Amino Types to the Absorption Capacity, Bicarbonate/Carbamate, and Cyclic Capacity

Evaluation of CO2 Absorption and Stripping Process for Primary and Secondary Amines

Study of New Blended Chemical Absorbents to Absorb CO2

Kinetics, Thermodynamics, and Mechanism of a Novel Biphasic Solvent for CO2 Capture from Flue Gas

Comparative Techno-Economic Analysis of CO2 Capture Processes Using Blended Amines

Enhancing CO2 capture of an aminoethylethanolamine-based non-aqueous absorbent by using tertiary amine as a proton-transfer mediator: From performance to mechanism

Techno-economic Analysis of CO2 Absorption into a Promising Blended Amine of DEEA-HMDA

Comprehensive technical analysis of CO<sub>2</sub> absorption into a promising blended amine of DEEA-HMDA

Experimental Study on Regeneration Characteristics of CO2-rich Blended Amine Solution Using Membrane Vacuum Regeneration Technology

A Novel Diamine Non-Aqueous Absorbent Based on N-methyl diethanolamine Regulation for Energy-efficient CO2 Capture

Evaluation of hybrid amines and alcohol solvent with ion-exchange resin catalysts for energy-efficient CO 2 capture

Study on performance of alkanolamines as absorbents for CO2 capture

Analysis of the changes in the absorption and regeneration performance of diethylenetriamine in carbon capture environments with functionalized alcohols and mixed amines

Insights into the interaction between typical amines and alkaline minerals for improved CO<sub>2</sub> absorption and mineralization

Experimental Study on a New High-Efficiency Aqueous Solvent Based on a Blend of N-MethyDiEthanolAmine and TriEthylene TetrAmine for the CO2 Capture

Absorption of Carbon Dioxide from Flue Gas Using Blended Amine Solutions