Abstract:Solvent regeneration for the conventional aqueous amine-based CO2 capture is very energy intensive. Development of phase-changing absorbents is an attractive solution for low energy consumption. In this work, a novel water-lean amino acid salt-based biphasic absorbent was proposed to improve CO2 capture performance and energy efficiency. Potassium prolinate (ProK) and potassium sarcosinate (SarK) with a secondary amino group were used as active components, and 2-alkoxyethanols with low volatility, low specific heat, and low viscosity were used as physical antisolvents and triggered the formation of solid phase during CO2 absorption. CO2 absorption and desorption characteristics in these systems and continuous capture cycles were investigated under ambient pressure. Relative regeneration energy consumption for solvent regeneration was also evaluated in comparison with the benchmark aqueous MEA. Phase change behavior and partition of CO2 absorbed in liquid and solid phases were characterized, and the product species in CO2-rich solid phase were identified by 13C NMR and XRD. Results demonstrated that using weak polar solvents, such as 2-methoxyethanol (EGME) and 2-ethoxyethanol (EGEE), can be favorable for the formation of solid precipitates in these systems investigated. Solid slurry with CO2 loading of 2.5–3.5 mol kg–1 can captured about 50–80% of the absorbed CO2. Ionic products such as bicarbonate and protonated amino acid salt were proved to be the main compositions in the solid precipitate. In comparison with aqueous 5.0 M MEA, the 3.0 M ProK/EGME system showed comparable cyclic capacity (about 0.80 mol kg–1) and a little higher desorption efficiency. Surprisingly, about 40–50% reduction of regeneration energy indicates that water-lean phase change ProK/EGME absorbent has a great potential for advanced CO2 capture technology.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c03525?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c03525</a>.Schematic diagram of the absorption–desorption and measuring overall energy consumption for solvent regeneration, estimation of the rate of CO2 absorption and desorption, measurement of CO2 loading, chemical shift of 13C NMR spectra of SarK+EGME and ProK++EGME solution in D2O, estimation of regeneration energy consumption for various absorbent solutions, DSC-TGA profiles of solid precipitates, desorption profiles for CO2-saturated aqueous and water-lean systems at 373 K; and Tables S1–S5 and Figures S1–S6 as noted in the text (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c03525/suppl_file/sc0c03525_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Regulating the absorption and solid regeneration performance of a novel anhydrous solid–liquid phase change absorbent for carbon capture

Regulation mechanism of CO 2 capture into the novel non-aqueous biphasic solvent: Solid-liquid phase change controllable

Research of Novel Polyamine-Based Biphasic Absorbents for CO2 Capture Using Alkanolamine to Regulate the Viscosity and Mechanism Analysis

Novel 2-amino-2-methyl-1-propanol-based biphasic solvent for energy-efficient carbon dioxide capture using tetraethylenepentamine as a phase change regulator

Novel Biphasic Solvent of AEP/1-propanol/H2O for CO2 Capture with Efficient Regeneration Performance and Low Energy Consumption

Research of novel polyamine-based biphasic absorbents for CO 2 capture using alkanolamine to regulate the viscosity and mechanism analysis

Phase Separation Behavior and CO2 Absorption Kinetic Analysis of DETA/DEA/DMAC Biphasic Absorbent

Research on alkanolamine based physical-chemical solutions as biphasic solvents for CO2 capture

A Novel ILs Biphasic Absorbent with Low Regeneration Energy Consumption for CO2 Capture: Screening of Phase Separation Regulators and Mechanism Study

Enhancing Capture Performance of Physical Solvent Biphasic Absorbent Using Tepa As Activator for Efficient Co2 Capture from Flue Gas

A Novel Phase Change Absorbent for CO2 Capture with Low Viscosity and Effective Absorption–Desorption Properties

Novel Nonaqueous Liquid–Liquid Biphasic Solvent for Energy-Efficient Carbon Dioxide Capture with Low Corrosivity

Energy-efficient biphasic solvents for industrial CO2 capture: Absorption mechanism and stability characteristics

Improving the absorption load, high viscosity, and regeneration efficiency of CO2 capture using a novel tri-solvent biphasic solvents of TETA-AMP-1DMA2P

Dual-functionalized ionic liquid biphasic solvents with aqueous-lean for industrial carbon capture: Energy-saving and high efficiency

Low-Energy-Consumption CO 2 Capture by Liquid–Solid Phase Change Absorption Using Water-Lean Blends of Amino Acid Salts and 2-Alkoxyethanols

Phase Separation Behavior and CO2 2 Absorption Kinetic Analysis of DETA/ DEA/DMAC Biphasic Absorbent

Energy-Efficient Biphasic Solvents for Industrial Carbon Capture: Role of Physical Solvents on CO2 Absorption and Phase Splitting.

Novel alkanolamine-based biphasic solvent for CO 2 capture with low energy consumption and phase change mechanism analysis

Adjusting the phase transition time node of a solid–liquid biphasic solvent based on 2-amino-2-methyl-1-propanol for efficient CO 2 capture: Insight into the regulatory effect of aminoethylethanolamine

Dynamic phase-splitting behaviour of biphasic solvent for carbon capture in a novel annular phase separator