Low-Energy-Consumption CO 2 Capture by Liquid–Solid Phase Change Absorption Using Water-Lean Blends of Amino Acid Salts and 2-Alkoxyethanols

Hui Li,Hui Guo,Shufeng Shen
DOI: https://doi.org/10.1021/acssuschemeng.0c03525
2020-08-11
Abstract:Solvent regeneration for the conventional aqueous amine-based CO<sub>2</sub> capture is very energy intensive. Development of phase-changing absorbents is an attractive solution for low energy consumption. In this work, a novel water-lean amino acid salt-based biphasic absorbent was proposed to improve CO<sub>2</sub> capture performance and energy efficiency. Potassium prolinate (ProK) and potassium sarcosinate (SarK) with a secondary amino group were used as active components, and 2-alkoxyethanols with low volatility, low specific heat, and low viscosity were used as physical antisolvents and triggered the formation of solid phase during CO<sub>2</sub> absorption. CO<sub>2</sub> absorption and desorption characteristics in these systems and continuous capture cycles were investigated under ambient pressure. Relative regeneration energy consumption for solvent regeneration was also evaluated in comparison with the benchmark aqueous MEA. Phase change behavior and partition of CO<sub>2</sub> absorbed in liquid and solid phases were characterized, and the product species in CO<sub>2</sub>-rich solid phase were identified by <sup>13</sup>C NMR and XRD. Results demonstrated that using weak polar solvents, such as 2-methoxyethanol (EGME) and 2-ethoxyethanol (EGEE), can be favorable for the formation of solid precipitates in these systems investigated. Solid slurry with CO<sub>2</sub> loading of 2.5–3.5 mol kg<sup>–1</sup> can captured about 50–80% of the absorbed CO<sub>2</sub>. Ionic products such as bicarbonate and protonated amino acid salt were proved to be the main compositions in the solid precipitate. In comparison with aqueous 5.0 M MEA, the 3.0 M ProK/EGME system showed comparable cyclic capacity (about 0.80 mol kg<sup>–1</sup>) and a little higher desorption efficiency. Surprisingly, about 40–50% reduction of regeneration energy indicates that water-lean phase change ProK/EGME absorbent has a great potential for advanced CO<sub>2</sub> capture technology.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c03525?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c03525</a>.Schematic diagram of the absorption–desorption and measuring overall energy consumption for solvent regeneration, estimation of the rate of CO<sub>2</sub> absorption and desorption, measurement of CO<sub>2</sub> loading, chemical shift of <sup>13</sup>C NMR spectra of SarK+EGME and ProK++EGME solution in D<sub>2</sub>O, estimation of regeneration energy consumption for various absorbent solutions, DSC-TGA profiles of solid precipitates, desorption profiles for CO<sub>2</sub>-saturated aqueous and water-lean systems at 373 K; and Tables S1–S5 and Figures S1–S6 as noted in the text (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c03525/suppl_file/sc0c03525_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.
chemistry, multidisciplinary,engineering, chemical,green & sustainable science & technology
What problem does this paper attempt to address?