Abstract:In this study, two types of porous Cf/Cm composites were obtained by introducing pyrolytic carbon (PyC) and pyrolytic carbon/furan resin carbon (PyC/FRC). Subsequently, Cf/Cm-SiC-(ZrxHf1−x)C composites with different carbon matrices were prepared by introducing SiC and (ZrxHf1−x)C matrices into the porous Cf/Cm composites via the reactive melt infiltration method, specifically termed as Cf/PyC-SiC-(ZrxHf1−x)C and Cf/PyC/FRC-SiC-(ZrxHf1−x)C composites. The microstructures of the porous Cf/Cm and Cf/Cm-SiC-(ZrxHf1−x)C composites with different carbon matrices were examined, and a comprehensive analysis was conducted on microstructural evolution and mechanical behaviors of the Cf/Cm-SiC-(ZrxHf1−x)C composites. The results indicate that both Cf/Cm-SiC-(ZrxHf1−x)C composites underwent similar microstructural evolution processes, differing only in terms of evolution kinetics and final microstructure. Differences in the pore structures of porous Cf/Cm composites, as well as in the reactivities of carbon matrices, were identified as primary influencing factors. Additionally, both Cf/Cm-SiC-(ZrxHf1−x)C composites exhibited “pseudo-ductile” fracture characteristics, with flexural strengths of 214.1 ± 8.8 MPa and 149.6 ± 12.2 MPa, respectively. In the Cf/PyC-SiC-(ZrxHf1−x)C composite, crack initiation during loading primarily originated from the ceramic matrix, while in the Cf/PyC/FRC-SiC-(ZrxHf1−x)C composite, failure initially arose from the residual FRC matrix. Excessive fiber corrosion and the presence of residual low-modulus FRC matrix resulted in lower mechanical performance.

Microstructure and Mechanical Properties of SiC and Carbon Hybrid Fiber Reinforced SiC Matrix Composite

Mechanical Behavior of SiCf/SiC Composites with Alternating PyC/SiC Multilayer Interphases

The Comparison of Microstructure and Oxidation Behaviors of (Sic-C)/pyc/sic and C/Pycht/Sic Composites in Air

Microstructure and Mechanical Properties of Carbon Fiber Reinforced Multilayered (pyc–sic)n Matrix Composites

Microstructural Evolution and Mechanical Behaviors of Cf/Cm-SiC-(ZrxHf1−x)C Composites with Different Carbon Matrices

Effect of Pyrocarbon Content in C/C Preforms on Microstructure and Mechanical Properties of the C/C–SiC Composites

Microstructure and Mechanical Properties of Three-Dimensional Carbon/Silicon Carbide Composites Fabricated by Chemical Vapor Infiltration

Effect of Pyc Interphase Thickness on Mechanical Behaviors of Sibc Matrix Modified C/Sic Composites Fabricated by Reactive Melt Infiltration

Microstructure and Mechanical Properties of SiCf/SiC Composite Prepared by Chemical Vapor Infiltration

Fabrication and mechanical properties of SiCf/SiC composites via polycarbosllane pyrolysis

Microstructural investigations of the pyrocarbon interphase in SiC fiber-reinforced SiC matrix composites

Fabrication, Microstructures and Properties of SiCf/SiC Composites Prepared with Two Kinds of SiC Fibers As Reinforcements

INFLUENCE OF MATRIX MODIFICATION ON MICROSTRUCTURE AND PROPERTIES OF CARBON FIBER REINFORCED SILICON CARBIDE COMPOSITES

Microstructure and mechanical properties of quasi-isotropic chopped fiber-reinforced PyC–SiC matrix composite prepared by novel nondamaging method

Microstructure Characterisation and Mechanical Behaviour of 2D C/SiC-C Composite with SiC/PyC Multilayer Matrix

Microstructure and mechanical properties of SiC f /SiC composite prepared by chemical vapor infiltration

Mechanical Properties and Fracture Behaviors of C/C Composites with PyC/TaC/PyC, PyC/SiC/TaC/PyC Multi-Interlayers

EFFECT OF C/C POROUS PREFORM ON THE MICROSTRUCTURE AND FLEXURAL STRENGTH OF C/C-SiC COMPOSITES

MICROSTRUCTURE OF 3D TEXTILE C/PYC/SIC COMPOSITES PREPARED BY CHEMICAL VAPOR INFILTRATION

Fabrication and Characterization of a Carbon Fibre Reinforced Carbon–silicon Carbide–titanium Silicon Carbide Hybrid Matrix Composite

Microstructure and mechanical property of short fiber reinforced C/C-SiC composites