Abstract:In order to combine the anti-friction performance of micro-texture with the lubrication effect of solid self-lubricating phase, and further improve the tribological performance of the coating under dry friction conditions. Fe 5 /10%WC/5% MoS 2 self-lubricating coating was prepared by laser cladding technology, and then elliptical micro-textures with different arrangement angles (0°, 45°, 90°) were processed on the surface of the coating by laser micro-texture technology. The friction and wear behavior of the micro-texture coating was investigated from the perspectives of friction coefficient, volume wear loss, and wear morphology. The improvement effect of micro-texture on the wear resistance of the coating was discussed, and the synergistic anti-friction mechanism of the self-lubricating coating and surface micro-texture was explored. The results show that the friction coefficient and volume loss of the 0° textured coating are the smallest under the external load of 70 N, and the wear mechanism is characterized by slight abrasive wear. The 45° textured coating exhibits local adhesive traces in addition to a few micro-cutting furrows, suggesting a combination of slight abrasive wear and adhesive wear. The friction coefficient and volume loss of the 90° textured coating are the largest and the volume loss is greater than that of the non-textured coating. The wear mechanism is dominated by fatigue wear, accompanied by slight abrasive wear and adhesive wear. During the friction and wear process, the elliptical micro-pits can promptly capture wear debris, reducing the continuous damage to the coating. Additionally, the solid lubricant (MoS 2 ) stored in the micro-pits can provide continuous lubrication to the friction contact area and effectively decrease the friction coefficient.

Tribologicai Properties of the Micro-WEDM Surface under Dry Friction and Wear Conditions

Tribological Properties of Micro-WEDM Surface under Oil Lubrication

Tribological property comparison between micro-WEDM and superfinishing grinding machining surfaces

Bearing and Lubrication Characteristics of Micro-Wire Electrical Discharge Machining Surface

Effects of normal load and velocity on the dry sliding tribological behaviour of CoCrFeNiMo0.2 high entropy alloy

Modelling of Tribological Behavior and Wear for Micro-Textured Surfaces of Ti2AlNb Intermetallic Compounds Machined with Multi-Dimensional Ultrasonic Vibration Assistance

Friction Behaviour and Self-Lubricating Mechanism of Low Alloy Martensitic Steel During Reciprocating Sliding

Wear Rate, Frictional Temperature, and Energy Consumption of Steel 52100 with Different Microstructures During Sliding

Surface Interaction and Wear Due to Sliding Electrical Contact of Materials

Friction and Wear On-Line Monitoring and Wear Mechanism Analysis under Dynamic Loading Manners

Microstructure and Tribology Behaviors of In-Situ WC/Fe Carbide Coating Fabricated by Plasma Transferred Arc Metallurgic Reaction

Experimental Study of the Effect of Surface Texturing on the Lubrication Performance in Point Contacts

The Contact Behavior Analysis Between Microcomponents on a Low-Frequency Reciprocating-Fretting Ball-on-Flat Tribometer

Friction and wear behaviors of the carbide tools embedded with solid lubricants in sliding wear tests and in dry cutting processes

Study On The Tribological Properties Of Titanium Alloys Sliding Against Wc-Co During The Dry Friction

Tribological Behavior of Textured Cemented Carbide Filled with Solid Lubricants in Dry Sliding with Titanium Alloys

Tribological mechanism of micro/meso/macroscopic textured surfaces under different normal forces, relative velocities, and sliding directions

Subsurface Dynamic Deformation and Nano-structural Evolution in 40cr Steel under Dry Sliding Wear

Influence of Micro-Texture on the Tribological Behavior of WC/MoS2/Fe-Based Alloy Coating by Laser Cladding

Investigation on Friction and Wear behavior of AISI 4340 Steel in Dry Sliding Condition

Friction and Wear Performance of Titanium Alloys against Tungsten Carbide under Dry Sliding and Water Lubrication