Abstract:The effects of different sliding distances and normal forces on the dry sliding wear behavior of room-temperature AISI 52100 bearing steel were studied. Wear tests were conducted using reciprocating friction and wear equipment at sliding distances of 100, 300, 500, and 700 m and under normal forces of 5, 10, 20, and 40 N. The results showed that the wear rate of the material first increased and then decreased with increasing sliding distance. The wear pattern changed from fatigue wear to a mix of fatigue and abrasive wear and finally evolved into only abrasive wear. The wear volume increased by more than 10 times with the normal force increasing from 5 to 40 N when the sliding distance was fixed at 500 m. The wear rate of the material peaked when fatigue wear and abrasive wear acted together. With increasing sliding distance, the coefficient of friction first increased, then decreased, and finally increased slowly until it stabilized. The duration of the run-in phase increased with the normal force, and the friction coefficient decreased from 0.8 at 5 N to 0.55 at 40 N. A finite element analysis of the steady stress of the wear process was carried out, and the results were consistent with the test results. The relationship between the sliding distance and normal force on the wear of AISI 52100 bearing steel was obtained by establishing a three-dimensional surface model. The mathematical model was used to predict the wear of AISI 52100 bearing steel under dry wear conditions.

Wear Rate, Frictional Temperature, and Energy Consumption of Steel 52100 with Different Microstructures During Sliding

A Comparative Investigation of the Tribological Behavior and Wear Mechanism of Bronze-graphite Composite under Dry- and Water-lubricated Sliding Against Steel

Tribological Properties of AISI 52100 Bearing Steel under Different Sliding Distance and Normal Force Conditions

Temperature dependence of energy dissipation during nanoscale wear of AISI 304L stainless steel

Temperature-mediated tribological characteristics of 40CrNiMoA steel and Inconel 718 alloy during sliding against Si3N4 counterparts

Tribological mechanisms of slurry abrasive wear

Tribological mechanism of micro/meso/macroscopic textured surfaces under different normal forces, relative velocities, and sliding directions

Effects of Temperature on the Tribological Properties of NM600 under Sliding Wear

Experimental Analysis and Wear Prediction Model Based on Friction Heat for Dry Sliding Contact

Formation and wear mechanism of tribo-oxides and the regime of oxidational wear of steel

Sliding Friction and Wear Properties of GCr15 Steel under Different Lubrication Conditions

Influence of Groove Surface Texture on Temperature Rise under Dry Sliding Friction

Tribological behavior of heat treated AISI 6150 steel

Atomistic insights into friction and wear characteristics of M50 bearing steel: a molecular dynamics simulation study

The Influence of Temperature and Load on Dry Sliding Wear and Friction Property of Low Metallic Friction Material

Tribological Behavior and Wear Mechanism of Cu-SiO2 Sintered Composite under Different Sliding Speeds

The effect of temperature on the unlubricated sliding wear of 5 CrNiMo steel against 40 MnB steel in the range 400–600°C

Friction and wear behaviour of steel with bionic non-smooth surfaces during sliding

A Simulation Method of Thermo-Mechanical and Tribological Coupled Analysis in Dry Sliding Systems

Wear behavior and damage characterization for AISI 52100 bearing steels: Effect of hardness and spherical carbides

Investigation on triboelectrification behavior of surface nanocrystallization of medium carbon steel