Abstract:One of the greatest challenges for using microbial fuel cells (MFCs) for wastewater treatment is creating a scalable architecture that provides large surface areas for oxygen reduction at the cathode and bacteria growth on the anode. We demonstrate here a scalable cathode concept by showing that a tubular ultrafiltration membrane with a conductive graphite coating and a nonprecious metal catalyst (CoTMPP) can be used to produce power in an MFC. Using a carbon paper anode (surface area Aan = 7 cm2, surface area per reactor volume Aan,s = 25 m2/m3), an MFC with two 3-cm tube cathodes (Acat = 27 cm2, Acat,s = 84 m2/m3) generated up to 8.8 W/m3 (403 mW/m2) using glucose [0.8 g/L in a 50 mM phosphate buffer solution (PBS)], which was only slightly less than that produced using a carbon paper cathode with a Pt catalyst (9.9 W/m3, 394 mW/m2; Acat= 7 cm2, Acat,s= 25 m2/m3). Coulombic efficiencies (CEs) with carbon paper anodes were 25-40% with tube cathodes (CoTMPP), compared to 7-19% with a carbon paper cathode. When a high-surface-area graphite brush anode was used (Aan = 2235 cm2, Aan,s = 7700 m2/m3) with two tube cathodes placed inside the reactor (Acat = 27 cm2, Acas, = 93 m2/m3), the MFC produced 17.7 W/m3 with a CE = 70-74% (200 mM PBS). Further increases in the surface area of the tube cathodes to 54 cm2 (120 m2/m3) increased the total power output (from 0.51 to 0.83 mW), but the increase in volume resulted in a constant volumetric power density (approximately 18 W/m3). These results demonstrate that an MFC design using tubular cathodes coated with nonprecious metal catalysts, and brush anodes, is a promising architecture that is intrinsically scalable for creating larger systems. Further increases in power output will be possible through the development of cathodes with lower internal resistances.

Performance of Stainless Steel Mesh Cathode and PVDF-graphite Cathode in Microbial Fuel Cells

Sewage Sludge-Derived Carbon-Doped Manganese As Efficient Cathode Catalysts in Microbial Fuel Cells

Microbial Fuel Cell Cathodes with Poly(dimethylsiloxane) Diffusion Layers Constructed Around Stainless Steel Mesh Current Collectors

Power Generation Using an Activated Carbon and Metal Mesh Cathode in A Microbial Fuel Cell

Power generation using carbon mesh cathodes with different diffusion layers in microbial fuel cells

Mesh optimization for microbial fuel cell cathodes constructed around stainless steel mesh current collectors

Titanium Dioxide Thin Film-Modified Stainless Steel Mesh for Enhanced Current-Generation in Microbial Fuel Cells

Air-cathode preparation with activated carbon as catalyst, PTFE as binder and nickel foam as current collector for microbial fuel cells.

Single-Step Fabrication Using A Phase Inversion Method of Poly(Vinylidene Fluoride) (pvdf) Activated Carbon Air Cathodes for Microbial Fuel Cells

Ion Exchange Membrane Cathodes For Scalable Microbial Fuel Cells

Tubular Membrane Cathodes for Scalable Power Generation in Microbial Fuel Cells.

Use of Carbon Mesh Anodes and the Effect of Different Pretreatment Methods on Power Production in Microbial Fuel Cells.

Stainless steel cloth modified by carbon nanoparticles of Chinese ink as scalable and high-performance anode in microbial fuel cell

Deposition of Fe on Graphite Felt by Thermal Decomposition of Fe(Co)(5) for Effective Cathodic Preparation of Microbial Fuel Cells

Microbial Fuel Cell Performance with Non-Pt Cathode Catalysts

Poly(vinylidene Fluoride-Co-hexafluoropropylene) Phase Inversion Coating As a Diffusion Layer to Enhance the Cathode Performance in Microbial Fuel Cells

Power Generation by Packed-Bed Air-Cathode Microbial Fuel Cells

Combined Carbon Mesh and Small Graphite Fiber Brush Anodes to Enhance and Stabilize Power Generation in Microbial Fuel Cells Treating Domestic Wastewater

Effects of different Pt-M (M = Fe, Co, Ni) alloy as cathodic catalyst on the performance of two-chambered microbial fuel cells

Polypyrrole/sargassum Activated Carbon Modified Stainless-Steel Sponge As High-Performance and Low-Cost Bioanode for Microbial Fuel Cells

Recent Progress in Electrodes for Microbial Fuel Cells