Abstract:Piezoresponse force microscopy (PFM) is a powerful characterization technique to readily image and manipulate ferroelectrics domains. PFM gives insight into the strength of local piezoelectric coupling as well as polarization direction through PFM amplitude and phase, respectively. Converting measured arbitrary units to physical material parameters, however, remains a challenge. While much effort has been spent on quantifying the PFM amplitude signal, little attention has been given to the PFM phase and it is often arbitrarily adjusted to fit expectations or processed as recorded. This is problematic when investigating materials with unknown or potentially negative sign of the probed effective electrostrictive coefficient or strong frequency dispersion of electromechanical responses since assumptions about the phase cannot be reliably made. The PFM phase can, however, provide important information on the polarization orientation and the sign of the electrostrictive coefficient. Most notably, the orientation of the PFM hysteresis loop is determined by the PFM phase. Moreover, when presenting PFM data as a combined signal, the resulting response can be artificially lowered or asymmetric if the phase data has not been correctly processed. Here, we demonstrate a path to identify the phase offset required to extract correct meaning from PFM phase data. We explore different sources of phase offsets including the experimental setup, instrumental contributions, and data analysis. We discuss the physical working principles of PFM and develop a strategy to extract physical meaning from the PFM phase. The proposed procedures are verified on two materials with positive and negative piezoelectric coefficients.

Drive Frequency Dependent Phase Imaging in Piezoresponse Force Microscopy

Influence of Feedback Parameters on Ferroelectric Domain Imaging with Piezoresponse Force Microscopy

In-situ Piezoresponse Force Microscopy Cantilever Mode Shape Profiling

SPM IMAGING OF DOMAINS IN PERIODICALLY POLED LiTaO3 CRYSTALS

Force-Electric Coupling of Nanoscale Ferroelectric Domains Based on Piezoelectric Force Microscopy (PFM)

A Multi-Mode Self-Centering Piezo Actuator: Design, Analysis and Its Application in Full-Stroke Microscopic Imaging

Piezoresponse phase as variable in electromechanical characterization

Quantitative piezoelectric force microscopy: Influence of tip shape, size, and contact geometry on the nanoscale resolution of an antiparallel ferroelectric domain wall

Study of piezo-induced surface vibration in solids using atomic force probe

Piezoresponse Force Microscopy Imaging and Its Correlation with Cantilever Spring Constant and Frequency

Accurate 3D Nanoscale Electromechanical Imaging with a Metrological Atomic Force Microscope

Piezo-generated charge mapping revealed through Direct Piezoelectric Force Microscopy

Piezoresponse Force Spectroscopy of Ferroelectric Materials

Nanoelectromechanics of Piezoresponse Force Microscopy

Flexoelectricity in periodically poled lithium niobate by PFM

Imaging Mechanism of Piezoresponse Force Microscopy in Capacitor Structures

Improvement and Application of Scanning Near Field Optical Microscope Based on A Piezoelectric Bimorph Shear Force Beam

Nanoscale investigation on electric field induced ferroelectric phase transitions in the rhombohedral PMN-PT single crystal

Multi‐scale Domain Structure Observation and Piezoelectric Responses for [001]‐oriented PMN‐33PT Single Crystal

Deciphering the Phase Transition-Induced Ultrahigh Piezoresponse in (K,na)nbo3-Based Piezoceramics.