Abstract:Purpose: Current photon-counting computed tomography detectors are limited to a pixel size of around 0.3 mm-0.5 mm due to excessive charge sharing degrading the dose efficiency and energy resolution as the pixels become smaller. In this work, we present measurements of a prototype photon-counting detector that leverages the charge sharing to reach a theoretical sub-pixel resolution in the order of $1 {\mu}$m. The goal of the study is to validate our Monte-Carlo simulation using measurements, enabling further development. Approach: We measure the channel response at the MAX IV Lab, in the DanMAX beamline, with a 35 keV photon beam, and compare the measurements with a 2D Monte Carlo simulation combined with a charge transport model. Only a few channels on the prototype are connected to keep the number of wire bonds low. Results: The measurements agree generally well with the simulations with the beam close to the electrodes but diverge as the beam is moved further away. The induced charge cloud signals also seem to increase linearly as the beam is moved away from the electrodes. Conclusions: The agreement between measurements and simulations indicates that the Monte-Carlo simulation can accurately model the channel response of the detector with the photon interactions close to the electrodes, which indicates that the unconnected electrodes introduce unwanted effects that need to be further explored. With the same Monte-Carlo simulation previously indicating a resolution of around $1 {\mu}$m with similar geometry, the results are promising that an ultra-high resolution detector is not far in the future.

Two-Dimensional Photon Counting Imaging Detector Based on A Vernier Position Sensitive Anode Readout

A Single Photon Counting Detector Based on One-Dimensional Vernier Anode

Decoding Algorithms of Single Photon Counting Imager Based on Two-Dimensional Vernier Anodes

Design of Vernier Anode Detector and Its Electronic Readout Circuit

Modeling the Encoding Structure and Spatial Resolution of Photon Counting Imagers with Vernier Anode Readout

Note: A Two-Dimensional Position-Sensitive Micro-Channel Plate Detector with a Cross-Connected-pixels Resistive Anode and Integrated Spectroscopy Amplifiers

Study Of Ultraviolet Photon Counting Detector With Delay-Line Anode

A Two-Dimensional Position-Sensitive Microchannel Plate Detector Realized with Two Independent One-Dimensional Resistive Anodes

Ghosting Theoretical Model of Single Photon Counting Imagers with Vernier Anode

Near-Range Large Field-of-View Three-Dimensional Photon-Counting Imaging with a Single-Pixel Si-Avalanche Photodiode

Image performance of photon-counting imaging detector with wedge-and-strip anode

Decoding Algorithms for Improving the Imaging Performance of Vernier Anode Readout

Investigation on extreme ultraviolet photon-counting imaging detector with position-sensitive anode

The Performance of Photon Counting Imaging with A Geiger Mode Silicon Avalanche Photodiode

Experimental study on photon counting imaging system based on avalanche photodiode

Extreme Ultraviolet Single Photon-Counting Imaging System Based on Induced Charge Position-Sensitive Anode

Two-dimension Delay-Line Microchannel Plate Imaging Detector

Design and experiments of photon counting imaging test platform

A Single Photon Detector Readout Circuit Based on 0.18 Μm CMOS Technology.

First Experimental Evaluation of a High-Resolution Deep Silicon Photon-Counting Sensor

Progress on a Simultaneous Photon Counting and Energy Integrating Detector for X-ray Imaging Applications