Abstract:To investigate mechanical behavior on in & post impact of CFRP tubes varying wall thickness and impactor, low‐velocity impact (LVI), compression‐after‐impact (CAI), and flexure‐after‐impact (FAI) tests were conducted and three main conclusions can be obtained. First, because of the point‐line contact for flat impactor, two peaks are found in the force‐displacement curves. Second, the failure mode of CAI is brittle fracture at the impact circumferential area. Third, FAI strength mainly depends on the no‐impact surface of tubes. With the help of the high‐speed camera and self‐designed fixture, it was investigated that the effects of the impactors in a variety of shapes on the mechanical behavior and failure mode of carbon fiber‐reinforced polymer (CFRP) tubes with a range of inner diameter during the low‐velocity impact (LVI) of four impact energies. Then, the three‐dimensional digital image correlation (3D‐DIC) system was carried out to monitor the damage evolution of the LVI‐damaged specimens under compressive and flexural loading. In addition, the residual compressive and flexural strength of all kinds of cases were compared and discussed. The results show that the increase in wall thickness can improve the LVI, compression‐after‐impact (CAI), and flexure‐after‐impact performance. The failure mode of compression changes to brittle fracture failure at the impact circumferential region. The CAI strength of the specimen damaged by a flat impactor is 23.89% less than that of a hemispherical one, but there is little difference in flexural loading. Highlights Mechanical behavior on in & post LVI of CFRP tubes varying wall thickness and impactor. Due to point‐line contact for flat impactor, two peak forces are in the F‐D curves. LVI property and residual strength are improved with the increase of wall thickness. Compressive failure mode is brittle fracture at the impact circumferential area. Flexure‐after‐impact strength mainly depends on the no‐impact surface of tubes.

Characteristic Investigation on Strength of Filament-Wound CFRP Tubes

CHARACTERISTIC ANALYSIS AND EXPERIMENTAL INVESTIGATION ON STRENGTH OF FILAMENT-WOUND CFRP TUBES

Modelling of Concrete-Filled Filament-Wound FRP Confining Tubes Considering Nonlinear Biaxial Tube Behavior

Investigation on Mechanical Behavior of Filament-Wound Cfrp Tubes

Experimental and numerical study of mechanical properties of filament-wound CFRP tubes

Experimental and Numerical Study on CFRP Tubes under Axial Crushing

Structural Deformations Analysis of Carbon Filament-Wound Composite Pressure Vessels under Internal Pressure

Experimental Study on Axial Compressive Behavior of Concrete-Filled FRP Filament-winded Tubes

FEA AND EXPERIMENTAL STUDY ON RELATION BETWEEN RADIAL DEFORMATION AND TYPICAL FAILURE MODES OF FILAMENT WOUND THICK-WALLED TUBES UNDER AXIAL COMPRESSION

Quasi-static Axial Crushing and Transverse Bending of Double Hat Shaped CFRP Tubes

Behavior of CFRP-strengthened Short Spiral Welded Tubes under Axial Load

Experimental Investigation of Effect of Winding Angles on Axially Compressive Properties of Thick-Walled C_f/Epoxy Tubes

Experimental Research on Concrete-Filled GFRP Tubes and GFRP-Steel Composite Tubes under Axial Compressive Load

Behavior Analysis of FRP Tube/filling Strengthened Steel Members under Axial Compression

Micro-XCT Characterization and Numerical Analysis of Bending Damage Mechanism in Carbon Fiber Plain, Twill and Winding Composite Tubes

Experimental investigation on the low‐velocity impact response and the residual strength of CFRP tubes

Experimental and Finite-Element Analysis of Metal-Inserted Filament-Wound Composite Tubes

The influence of drilling-induced damages and hole quality on hoop tensile and fatigue behavior of CFRP tubes

Experimental Investigation and Damage Simulation of Large-Scaled Filament Wound Composite Pipes

Axial compression performance and failure modes of 304 stainless-steel/GFRP hybrid tubes

EXPERIMENTAL STUDY ON FRP-STEEL COMPOSITE TUBE CONCRETE FLEXURAL COMPONENTS