Abstract:Fiber-reinforced flexible pipes are subjected to large axial tension loads in deep-water applications, which may result in the excessive deformation of the pipes. Owing to the anisotropy of the composite materials, accurately describing the tensile behavior of these pipes is difficult. Theoretical, numerical, and experimental methods are employed in this study to investigate the mechanical characteristics of a glass fiber-reinforced unbonded flexible pipe under axial tensile loads. Based on the load–strain relationship of each pipe layer, analytical equations considering the effect of anisotropy and radial deformation are first proposed to calculate the axial tensile stiffness of the pipe. A detailed numerical model is established to simulate the tensile behavior of the pipe. A prototype test is performed on a 4500 mm long sample using a tensile testing machine. The leading roles of outer tensile reinforcement layers in axial tensile capacity are illustrated by the strain energy of the pipe layers obtained by the numerical model. Subsequently, a comparison analysis of the mean fiber direction strains of the selected sections are performed between numerical and experimental results, which validates the numerical model. Additionally, the stress distributions of different pipe layers are discussed based on the results of the numerical analysis. Finally, the comparison of axial tensile stiffness results validates the accuracy of the analytical model considering radial deformation. This study proposes effective theoretical and numerical models to predict the tensile behavior of a fiber-reinforced flexible pipe, which provides useful references for the design and structural analysis of these pipes.

Experimental Investigation and Damage Simulation of Large-Scaled Filament Wound Composite Pipes

Continuum Damage Modeling and Progressive Failure Analysis of Carbon Fiber/epoxy Composite Pressure Vessel

Numerical Study of CFRP-Bonded Pressure Pipes Subject to Impact Load

Fatigue Behaviour and Life Prediction of Filament Wound CFRP Pipes Based on Coupon Tests

Study on progressive damage performance of basalt‐fiber wound composite tube

Global-local Coupled Analysis of Fiber-Reinforced Composite Pipes for Application in Deepwater Considering the Failure Evaluation

Compressive Experiment and Damage Simulation Studies of Composite Structure with Plies Drop-off

Quasi-static Axial Crushing and Transverse Bending of Double Hat Shaped CFRP Tubes

Mechanical Analysis and Parameter Design of CFRP-Wrapped Defected Steel Pipe

Mechanical Characteristics of Fiber-Reinforced Flexible Pipe Subjected to Axial Tensile Load

Study on the bending behavior of reinforced thermoplastic pipes (RTPs): A theoretical continuum damage model and experimental tests

Buckling Behavior of Pultruded Carbon Fiber Reinforced Polymer Pipes under Axially Compressive Load

Investigation on the Bending Behaviors of Reinforced Thermoplastic Pipes Using a Strain Energy Equivalence Method and a Continuum Damage Numerical Model

An Analytical Model For The Progressive Failure Prediction Of Reinforced Thermoplastic Pipes Under Axial Compression

Experimental and numerical study of mechanical properties of filament-wound CFRP tubes

The debonding failure analysis of corroded pipes repaired with CFRP under tension and the bending moment

Micro-XCT Characterization and Numerical Analysis of Bending Damage Mechanism in Carbon Fiber Plain, Twill and Winding Composite Tubes

Experimental and Numerical Study on the Dry/wet Burst Failure of Reinforced Thermoplastic Pipes

Theoretical and Experimental Study on the Continuum Damage Mechanical (CDM) Behavior of RTPs under Axial Tension

Full-Scale Experiment And Numerical Simulation Of Prestressed Concrete Cylinder Pipe With Broken Wires Strengthened By Prestressed Cfrp

Numerical and Experimental Investigation of the Burst Resistance of Glass-Fiber Thermoplastic Composite Pipes under Internal Pressure