Abstract:Carbon-fiber reinforced composites are made up of three different phases. Tensile or compressive deformation in the longitudinal (fiber) orientation is controlled by the fibers, leading to a linear stress strain response which ends abruptly when the fibers fail by tensile fracture or kinking in compression. Conversely, major non-linear deformations can develop under transverse compression or in-plane shear because deformation is controlled by the polymeric matrix and the interphase.In this paper, first the V-notched rail shear test was used to research the mechanical properties of composite under in-plane shear loading, and the fracture surfaces of failed specimens were examined using scanning electron microscopy (SEM). The broken samples showed a large residual shear displacement. For [0/90](8s) cross-ply laminate V-notched beam test, the failure mode is the interactions of intralaminar and interlaminar failure. The intralaminar interfacial debonding, matrix cracking and interlaminar degradation occurs in succession. Then a representative volume element (RVE) of fiber random distribution was established, with two dominant damage mechanisms-matrix plastic deformation and interfacial debonding included in the simulation by the extended Drucker-Prager model and cohesive zone model respectively. The simulation results clearly reveal the damage process of the composites and the interactions of different damage mechanisms. It can be concluded that the in-plane shear fracture initiates as interfacial debonding and evolves as a result of interactions between interfacial debonding and matrix plastic deformation. The progressive damage process and final failure mode of in-plane shear model which are based on constitute are very consistent with the observed result under SEM of V-notched rail shear test. Also a transverse shear model was established as contrast in order to comprehensively understand the mechanical properties of composite materials under shear loading, and the progressive damage process and final failure mode of composite under transverse shear loading were researched.

Compressive Experiment and Damage Simulation Studies of Composite Structure with Plies Drop-off

Influence of Fiber Cutting at the Composite Grid Intersection on the Compressive Performance of Laminate

Experimental and Numerical Study on Failure Behaviors of Composite Grid Stiffeners under Tensile and Flexural Loading

A 3D finite element model to simulate progressive damage in unidirectional- and woven-fibre thermoplastic discontinuous-long-fibre composites

High-fidelity Simulations of Multiple Fracture Processes in a Laminated Composite in Tension

Microscopic Progressive Damage Simulation of Unidirectional Composite Based on the Elastic–plastic Theory

Failure analysis and experimental study on bolted composite joints based on continuum damage mechanics

Progressive fracture analysis of the open-hole composite laminates: experiment and simulation

Simulation and analysis of delamination damage propagation in CFRP structures

Experimental and numerical simulation study on Near-edge/On-edge Low-Velocity impact and residual compressive strength of T300/69 laminates

Experimental and Simulation Study on Failure of Thermoplastic Carbon Fiber Composite Laminates under Low-Velocity Impact

Microscopic Progressive Damage Simulation and Scale-Span Analysis of Cross-Ply Laminate Based on the Elastic–Plastic Theory

Investigation on damage behavior of composite T-shaped stiffened panels under compression after multi-point impact considering impact positions

A double-phase field model for multiple failures in composites

Microscopic Progressive Damage And Failure Analysis Of Carbon-Fiber Reinforced Composite Under Shear Loading

Meso-scale modeling and damage analysis of carbon/epoxy woven fabric composite under in-plane tension and compression loadings

Experimental and simulation study on compressive failure evolution of multidirectional laminates with different dimensions

Progressive Failure Analysis of Composite Laminates Subjected to Transverse Loading with Augmented Finite Element Method

Numerical and Experimental Analysis of Delamination in the T-Stiffener Integrated Composite Structure

Numerical and Experimental Investigation on Mechanical Responses of Plain Woven CFRP Composite under Various Loading Cases

Experimental and numerical investigations on the dynamic response of woven carbon fiber reinforced thick composite laminates under low-velocity impact