Abstract:A novel FFT-based computational framework for coupling non-local elastic-plastic damage model is proposed in this paper, which is employed to accurately simulate the transverse tensile behaviors of unidirectional (UD) CF/PEEK composite materials under different temperatures. To address the distinct material properties exhibited by different microscopic constituents within the composite, two approaches are employed: (i) an integral-type regularized traction-separation damage model is applied to the interphase debonding, and (ii) an implicit gradient regularization technique for Lemaitre-type damage (matrix cracking) of the PEEK. By coupling the non-local damage model capable of accurately characterizing different failure modes within composites with an FFT computational framework, accurate predictions of the transverse tensile performance of UD-CF/PEEK composites at different temperature conditions can be achieved. Furthermore, the influence of non-local feature parameters and interphase mechanical properties on the composite's mechanical behavior is thoroughly discussed. Comparisons with experimental results affirm the accurate prediction of the transverse tensile behavior of UD-CF/PEEK composites through the proposed computational framework. Ultimately, based on this framework, the transverse tensile modulus and strength of UD-CF/PEEK composites, considering different fiber volume fractions and temperatures, are predicted, successfully demonstrating the effectiveness and applicability of the proposed approach in forecasting the mechanical behavior of composites.

Theoretical and Experimental Study on the Continuum Damage Mechanical (CDM) Behavior of RTPs under Axial Tension

Continuum Damage Modeling and Progressive Failure Analysis of Carbon Fiber/epoxy Composite Pressure Vessel

Study on the bending behavior of reinforced thermoplastic pipes (RTPs): A theoretical continuum damage model and experimental tests

Progressive failure analysis of 2D woven composites at the meso-micro scale

Analysis of Reinforced Thermoplastic Pipe (RTP) under Axial Loads

Investigation on the mechanical properties of the reinforced thermoplastic pipe (rtp) under internal pressure

Behaviour of Reinforced Thermoplastic Pipe (RTP) under Combined External Pressure and Tension

A progressive damage model for carbon fiber-reinforced polymer laminates subjected to fastener pull-through failure

Analysis of Cord-Rubber Composite Response Using the Nonlinear Continuum Damage Mechanics Approach

Failure analysis and experimental study on bolted composite joints based on continuum damage mechanics

An Experimental and Analytical Study on a Damage Constitutive Model of Engineered Cementitious Composites under Uniaxial Tension

Buckling of Reinforced Thermoplastic Pipe (rtp) under Combined Bending and Tension

A Comparative Study on the Post-Buckling Behavior of Reinforced Thermoplastic Pipes (RTPs) Under External Pressure Considering Progressive Failure

Progressive Damage and Failure Analysis of Three-Dimensional Braided Composites under Multiaxial Loadings

Study on reinforced thermoplastic pipe under combined tension and internal pressure

A new progressive damage model for predicting the tensile behavior of the three-dimensional woven carbon/carbon composites using micromechanics method

Bending Behavior of Reinforced Thermoplastic Pipe

Collapse of reinforced thermoplastic pipe (RTP) under combined external pressure and bending moment

Development of a Numerical Material Model for Axial Crushing Mechanical Characterization of Woven CFRP Composites

Behaviour of reinforced thermoplastic pipe under combined bending and external pressure

A novel FFT framework with coupled non-local elastic-plastic damage model for the thermomechanical failure analysis of UD-CF/PEEK composites