Abstract:Composite material high-pressure storage vessel has been increasingly applied in the hydrogen storage industry. This study aims to establish parametric analysis of fiber wound composite vessel and investigate the stress distribution, failure mechanism as well as the burst strength. Based on the maximum strain criterion and Tsai-Wu failure criterion, the burst strength of the vessel and the failure mechanism of the cylinder segment were evaluated and studied. The stresses of the cylinder were much higher than those of the dome. The cylindrical part of the vessel is its weakest area. Matrix failure initiated at the spiral wound layer, then the accumulation of matrix failure resulted in the stiffness becoming degraded and hence fiber failure happened on the hoop wound layers. The fiber failure leaded to the ultimate failure of the vessel. The wound scheme of the outer layers also plays an important role on the load-bearing ability of the vessel. The burst strength of vessel with case-A wound was 122 MPa, while it was 91 MPa for case-B wound, about 25.4% decrease. The numerical results were compared with the burst mode studied in experiments on composite vessels and a good agreement was obtained. This study provides a theoretical foundation for safe design and utilization of composite material high-pressure vessel in the fields of hydrogen storage.

Structural Deformations Analysis of Carbon Filament-Wound Composite Pressure Vessels under Internal Pressure

Mechanical Analysis and Optimal Design for Carbon Fiber Resin Composite Wound Hydrogen Storage Vessel With Aluminum Alloy Liner

Mechanical Analysis of Carbon Fiber Filament Wound Hydrogen Storage Vessel with Aluminum Alloy Liner

Large deformation finite element analysis of planar carbon fiber wound composite pressure vessel

Mechanical Analysis of Carbon Fiber Wound High Pressure Hydrogen Storage Vessel and Prestress Control in Manufacturing Process

Optimal Control of Cylinder Wall's Stresses of Composite Material High-pressure Hydrogen Storage Vessel

Mechanical Analysis and Reasonable Design for Ti-Al Alloy Liner Wound with Carbon Fiber Resin Composite High Pressure Vessel

Stress–strain and Burst Failure Analysis of Fiber Wound Composite Material High-Pressure Vessel

Design Optimization for Filament Wound Cylindrical Composite Internal Pressure Vessels Considering Process-Induced Residual Stresses

Mechanical Analysis and Optimal Control of Hydrogen Storage Vessels with Carbon Fiber Filament Wound Aluminum Liner

Experimental and Numerical Investigation of the Strain Response of the Filament Wound Pressure Vessels Subjected to Pressurization Test

Study on Parametric Modeling and Finite Element Analysis for Composite Hydrogen Storage Vessel

Structure Analysis of Composite Pressure Vessel with Ultra-Thin Metallic Liner

Design and Fabrication of Carbon-Fiber-wound Composite Pressure Vessel with HDPE Liner

Multiparametric Sensitivity Analysis of Multilayered Filament-Wound Cylinder under Internal Pressure

Strength and Failure Analysis of Fiber-Wound Composite Gas Cylinder via Numerical Simulation

Stress and Damage Analyses of Composite Overwrapped Pressure Vessel

Bursting problem of filament wound composite pressure vessels

Exploring Strain Characteristics and Bearing Capacity of a Carbon Filament-Wound Composite Cylindrical Shell under Hydrostatic Pressure

Multiscale analysis of composite pressure vessel structures wound with different fiber tensile force

NUMERICAL SIMULATION OF STIFFNESS DEGRADATION MODEL FOR FIBER-WINDING COMPOSITE PRESSURE VESSELS