Abstract:Nickel-rich layered oxides, as the most promising commercial cathode material for high-energy density lithium-ion batteries, experience significant surface structural instabilities that lead to severe capacity deterioration and poor thermal stability. To address these issues, radially aligned grains and surface LixNiyWzO-like heterostructures are designed and obtained with a simple tungsten modification strategy in the LiNi0.91Co0.045Mn0.045O2 cathode. The formation of radially aligned grains, manipulated by the WO3 modifier during synthesis, provides a fast Li+ diffusion channel during the charge/discharge process. Moreover, the tungsten tends to enter into the lattice of the primary particle surface, and the armor-type tungsten-rich heterostructure protects the bulk material from microcracks, structural transformations, and surface side reactions. First-principles calculations indicate that oxygen is more stable in the surface tungsten-rich heterostructure than elsewhere, thus triggering an improved surface structural stability. Consequently, the 2 wt % WO3-modified LiNi0.91Co0.045Mn0.045O2 () material shows outstanding prolonged cycling performance (capacity retention of 80.85% after 500 cycles) and excellent rate performance (5 C, 188.4 mA h g–1). In addition, its layered-to-rock salt phase transition temperature is increased by 80 °C compared with that of the pristine cathode. This work provides a novel surface modification approach and an in-depth understanding of the overall performance enhancement of nickel-rich layered cathodes.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c12893?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c12893</a>.SEM images of the raw materials; SEM images of the intermediate materials; SEM images for the lithiated cathode materials; cross-sectional images; TEM images with EDS mapping and line scans; XRD patterns for the lithiated cathode materials; Rietveld fitting results for the XRD patterns; DFT calculation models of a W atom in different substitution sites; XPS spectra and fitting results; electrochemical performance between 2.5 and 4.3 V; electrochemical performance between 2.7 and 4.5 V; full pouch-type cell cyclability; GITT curves; cyclic voltammogram curves; in situ XRD patterns during the charging process; X-ray diffraction patterns after 200 cycles; equivalent circuit of EIS fitting; schematic illustration of the fading mechanism; in situ XRD patterns during the heating experiment; DSC profiles; TG/DSC profiles; DFT calculation models in different sites; ICP-AES results; crystallographic results; XPS fitting results; cycling performance results; rate performance results; GITT results; comparison of electrochemical performance results; EIS results; and charges gain/loss results (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c12893/suppl_file/am0c12893_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Degradation factors of a new long-life cathode

Degradation Factors Of A New Long Life Cathode

ACCELERATED LIFE TEST STUDIES OF NEW COATED DISPENSER CATHODES

The Study of Thin Film High–voltage Li-Ion Cathodes to Reveal Surface Reactions and Coating Performance

Diffusion-Kinetically Dormant Ni-Rich Cathode at High Potentials

Opening a New Horizon for the Facile Synthesis of Long-Life Ni-Rich Layered Cathode

Extreme Fast Charge Aging: Correlation Between Electrode Scale and Heterogeneous Degradation in Ni-rich Layered Cathodes

Enhancing Structure and Cycling Stability of Ni-rich Layered Oxide Cathodes at Elevated Temperatures Via Dual-Function Surface Modification

Copper Cathode’s Ablated Structure Operated in a 50 Megawatt Arc Heater

Regulating the Grain Orientation and Surface Structure of Primary Particles through Tungsten Modification to Comprehensively Enhance the Performance of Nickel-Rich Cathode Materials

Surface Miscible Structure Modulation of Li‐Rich Cathodes by Dual Gas Surface Treatment for Super High‐Temperature Electrochemical Performance

Electrochemical Oxygen Evolution Coupled Structure and Capacity Decay of Single-Crystal LiNi0.6Co0.2Mn0.2O2 Cathode Materials

Lattice and Local Electronic Structure Modulation Enables Ultra-Long-Life Li-Rich Cathode Materials

Revealing the Accelerated Capacity Decay of a High‐Voltage LiCoO 2 upon Harsh Charging Procedure

Extended Cycle Life Implications of Fast Charging for Lithium-Ion Battery Cathode

Cathode Evolution Track for Evaluating Commercial Lithium-Ion Battery Attenuation through Ar Ion Beam Cutting

Origin of structural degradation in Li-rich layered oxide cathode

Revealing the Accelerated Capacity Decay of a High-Voltage LiCoO<sub>2</sub> upon Harsh Charging Procedure

An Innovative Insight into Performance Degradation of NCM111 Cathode Induced by Suspension of Operation

Na 2 S Treatment and Coherent Interface Modification of the Li-Rich Cathode to Address Capacity and Voltage Decay

Correlating Rate‐Dependent Transition Metal Dissolution between Structure Degradation in Li‐Rich Layered Oxides