Abstract:Nowadays, the growing grievous environment problems together with the exhaustion of energy resources put urgent demands for developing high energy density. Considering the factors including capacity, resource and environment, Manganese-based lithium-rich layer-structured cathode materials xLi2MnO3⋅(1-x)LiMO2 (M = Ni, Co, Mn, and other metals) are drawing increasing attention due to their high reversible capacities, high discharge potentials, and low cost. They are expected to be one type of the most promising cathode materials for the next-generation Li-ion batteries (LIBs) with higher energy densities. Unfortunately, their commercial applications are hindered with crucial drawbacks such as poor rate performance, limited cycle life and continuous falling of the discharge potential. With decades of extensive studies, significant achievements have been obtained in improving their cyclability and rate performances, but the potential decay remains a severe challenge. Fundamental investigations have clarified that the continuous migration of the transition metal (TM) ions into the lithium layer and the resultant irreversible structural transformation are responsible for the potential decay. Recent study reports that the P2-NaxMO2 (M = Ni, Com Mn) shows a phase transformation from P2 to O2 with the disodium while the formation energy of O2 phase is around 25meV f.u.-1 lower than P2 structure. Such an energy difference can significantly affect the migration of the transition metal ions. Our work aims to improve the properties of Li-rich cathode by preparation of Mn based hybrid Li-Na materials and O2-typed layered structure materials for Li-rich cathode. The precursor was prepared by a facile coprecipitation method. The as-prepared precursor was then thoroughly mixed with Na2CO3 and Li2CO3 and calcined in air at 500℃ for 5h and 900℃ for 12h to get NaxLi1.2-x[Ni0.2Mn0.6]O2. The lithiation was carried out in three different methods, that is, the solid phase calcination (LRLO-C) and the electrochemical reaction (LRLO-E). The formula of the as-prepared material was determined to be Li1.2Ni0.2Mn0.6O2. The cathode electrodes were prepared by mixing 80wt% LNMO, 15wt% acetylene black and 5% Polyvinylidene fluoride onto an Al foil. The SEM of the as-prepared samples through different lithiation methods are shown in Figure 1. Obviously, we can see that the samples maintain spherical topography, but the details are not the same. The secondary particles of LRLO-C clustered and formed a solid sphere (Figure 1d), while the sample of LRLO-E keeps many hollows (Figure 2b). The result of electrochemical measurement of LRLO-E (Figure 1a) indicates such a structure has an enhanced cycle performance but relatively low capacity, while LRLO-C (Figure 1c) indicates that the O2 layered structure electrode from solid calcination delivered a discharge capacity of 238 mAh g-1 at 30mA g-1 and the retention after 50 cycles was 93%, but a long activation process. In summary, the work described here shows a potential of O2 layered structure of Li-rich materials as promising materials to deal with voltage decay and long cycle life for Li-rich materials making it possible for commercial application. Figure 1

Electrochemical Oxygen Evolution Coupled Structure and Capacity Decay of Single-Crystal LiNi0.6Co0.2Mn0.2O2 Cathode Materials

Suppressed Oxygen Extraction and Degradation of LiNi X Mn Y Co Z O 2 Cathodes at High Charge Cut-off Voltages

Structural Origin of Suppressed Voltage Decay in Single‐Crystalline Li‐Rich Layered Li[Li0.2Ni0.2Mn0.6]O2 Cathodes

Structural Origin of Suppressed Voltage Decay in Single-Crystalline Li-Rich Layered Li[Li0.2 Ni0.2 Mn0.6 ]O2 Cathodes.

Tuning Electrochemical Properties of Li-Rich Layered Oxide Cathodes by Adjusting Co/Ni Ratios and Mechanism Investigation Using in Situ X-ray Diffraction and Online Continuous Flow Differential Electrochemical Mass Spectrometry

Insights into the Enhanced Cycling Stability of Cobalt-Free Single-Crystal Layered Oxide Cathodes at Elevated Voltage

Electrochemical Behaviours and Structure Evolution of High Capacity Li1.2Cr0.4Mn0.4O2 Cathode Material in a Wide Voltage Range

Suppressed Lattice Oxygen Release Via Ni/Mn Doping from Spent LiNi0.5Mn0.3Co0.2O2 Toward High-Energy Layered-Oxide Cathodes.

Mitigating Evolution of Lattice Oxygen and Stabilizing Structure of Lithium-Rich Oxides by Fabricating Surface Oxygen Defects

Origin of Structural Evolution in Capacity Degradation for Overcharged NMC622 Via Operando Coupled Investigation

Controllable oxygen vacancies (in surface and bulk) to suppress the voltage decay of Li-rich layered cathode

Efficient Synthesis of O2 Layered Structure for High Performance Li-Rich Cathode

Tuning Oxygen Redox Chemistry in Li-Rich Mn-Based Layered Oxide Cathodes by Modulating Cation Arrangement.

Revealing the degradation pathways of layered Li-rich oxide cathodes

Electrolyte Optimization to Improve the High-Voltage Operation of Single-Crystal LiNi0.83Co0.11Mn0.06O2 in Lithium-Ion Batteries

Modification of Li-Rich Layer-Structured Cathode Materials by Supercritical Co2 Fluid

Revisiting the Na2/3Ni1/3Mn2/3O2 Cathode: Oxygen Redox Chemistry and Oxygen Release Suppression.

Electrochemical Aging Protocol Governed Capacity Losses and Structure Degradations in Layered LiNi0.8Co0.1Mn0.1O2 Oxides

Evolution Mechanism of Phase Transformation of Li-rich Cathode Materials in Cycling

Evolution of Structure and Lithium Dynamics in LiNi0.8Mn0.1Co0.1O2 (NMC811) Cathodes During Electrochemical Cycling

Structural and Chemical Evolution of Li- and Mn-Rich Layered Cathode Material