Abstract:As a major obstacle to high performance milling, chatter will inevitably decrease tool life, material removal efficiency and workpiece surface quality. Active control based on actuators for chatter suppression has been developed for a long time. However, in traditional active control, the feedback signals are usually time domain vibration signals, which will mitigate both chatter frequencies and normal frequencies, including rotation frequency and its frequency multiplications. In fact, rotation frequency and its frequency multiplications belong to normal cutting phenomenon, which don't need to be suppressed. Therefore, in traditional control strategies, more energy is wasted due to normal frequencies, which cannot obtain the optimal performance and causes the saturation effect of actuators. In order to solve this problem, this paper realized milling chatter suppression based on the adaptive vibration reshaping, which can precisely modify and control the milling vibration frequencies in frequency domain. Hence, the required control forces provided by actuators will decrease a lot, which can optimize the actuator performance and alleviate the saturation effect. Simulation results show that the adaptive vibration reshaping can suppress chatter frequencies effectively without changing rotation frequency and its frequency multiplications, which satisfies the initial control requirement for optimization of actuator performance. Besides, the convergence analysis, the noise resistance performance analysis, the control delay analysis and the chatter frequencies identification errors analysis are also presented for better facilitation to milling chatter suppression. Finally, contrastive milling tests are implemented on a three-axis milling machine. Experimental results show the designed control algorithm can decrease chatter frequencies, while having a little influence on normal frequencies.

Active Vibration Control For Milling Processes

Active vibration control for peripheral milling processes

Design and Control of Active Stage for Vibration Cancellation in Milling

H<sub>∞</sub>/μ Robust Control of Vibration for an Ultra-Precision Grinding Machine

Active vibration control of milling processes based on H∞

H∞/μ Robust Control of Vibration for an Ultra-precision Grinding Machine

Active Vibration Control of Thin Plate Milling Using Piezoelectric Actuator

The Active Vibration Attenuation of A Built-In Motorized Milling Spindle

Active vibration control development in ultra‐precision machining

Active Control of Milling Chatter Considering the Coupling Effect of Spindle-Tool and Workpiece Systems

A Novel Hybrid Error Criterion-Based Active Control Method for On-Line Milling Vibration Suppression with Piezoelectric Actuators and Sensors.

Active Damping of Milling Chatter Vibration Via a Novel Spindle System with an Integrated Electromagnetic Actuator

Active Control of Milling Chatter Based on the Built-in Force Actuator

Study on Online Intelligent Control of Cutting Vibration in Milling Process

Active Damping of Milling Vibration Using Operational Amplifier Circuit

Adaptive Vibration Reshaping Based Milling Chatter Suppression

Displacement Difference Feedback Control of Chatter in Milling Processes

Stability and Control for Cutting Chatter Based on Active Magnetic Bearings

A Chatter Mitigation Technique in Milling Based on H∞-ADDPMS and Piezoelectric Stack Actuators

Robust active control based milling chatter suppression with perturbation model via piezoelectric stack actuators

Dynamic modelling and simulation of peripheral milling process