Abstract:For signal processing of a Micro-Electro-Mechanical System (MEMS) Inertial Measurement Unit (IMU), a digital-analog hybrid system-on-chip (SoC) with small area and low power consumption was designed and implemented in this paper. To increase the flexibility of the processing circuit, the designed SoC integrates a low-power processor and supports three startup or debugging modes for different application scenarios. An application-specific computing module and communication interface are designed in the circuit to meet the requirements of IMU signal processing. The configurable clock allows users to dynamically balance computing speed and power consumption in their applications. The chip was taped out under SMIC 180 nm CMOS technology and tested for performance. The results show that the chip's maximum running frequency is 105 MHz. The total area is 33.94 mm2. The dynamic and static power consumption are 0.65 mW/MHz and 0.30 mW/MHz, respectively. When the system clock is 25 MHz, the dynamic and static power consumption of the chip is 76 mW and 66 mW, and the dynamic and static power consumption of the FPGA level are 634 mW and 520 mW. The results verify the superiority of the application specific integrated circuit (ASIC) solution in terms of integration and low power consumption.

Design and implementation of a novel programmable power monitor chip

Low Dropout Linear Regulator with No Off-Chip Capacitor and Low Power Consumption

Design and Implementation of High-Efficiency and Low-Power DC-DC Converter with PWM/PFM Modes

Design and implementation of a multifunctional management chip for multi-cell Li-ion batteries in series

Design of the Power Management Module Integrated in SOC

An Energy Metering Chip with a Flexible Computing Engine

Design of a Novel 8-Bit 0.35-&Amp;#x00b5;m BiCMOS Pipelined ADC

A Novel Multi-Functional Leakage Current Protector IC Design

Circuits and Implementation of a Low-Power Embedded EEPROM Memory

A Miniature On-Chip Multi-Functional ECG Signal Processor with 30 &#x00b5;w Ultra-Low Power Consumption

Programme Design of Reference Voltage Source Module Embedded in LCOS Chip

Low Power Design of Portable ECG Monitor Using C8051F040 Microcontroller

Design Methodology Of Cmos Low Power

The Implementation of Low Power SoC Chip and Solution for Portable Blood Glucose Meter

Power Supply Module Design in the Low Power Consumption Application

Design of Low-Power Charge-Pump Power Management IC

A low-power remotely-programmable MCU for implantable medical devices

Research of Easy-Integrated Intelligent Power Supply Monitor System

[A Smart Low-Power-Consumption ECG Monitor Based on MSP430F5529 and CC2540].

Design and Implementation of an On-Chip Low-Power and High-Flexibility System for Data Acquisition and Processing of an Inertial Measurement Unit.

Low Power Design of Multi-mode Switching Power Supply Controller IC