Abstract:We demonstrate the laser processing for fabrication of advanced photonic devices including fiber gratings and high transmittance biomimetic windows. The fiber gratings, including fiber Bragg gratings (FBGs) and long period fiber gratings (LPFGs), are fabricated in non-sensitized standard telecom single-mode fiber by femtosecond (fs) laser, making them hightemperature (1000 ℃) stable. The FBG written by fs laser combined with phase mask method is used for monitoring the thermal effect in fs laser interaction with silica glass. The peak temperature of the thermal impulse is estimated about 4800 ℃, which decays to around 500 ℃ in the pulse interval for irradiation of 1.1 mJ at repetition rate of 1 kHz. When the pulse energy and repetition rate increase in the fabrication process of FBGs, the fs-laser-induced grating regions extend from the fiber core to the cladding?air boundary due to the laser self-focusing. With the help of selective chemical etching of the laser modified grating regions, a microhole array structured FBG is formed, which is demonstrated in the application of simultaneous sensing for refractive index (RI) and temperature. For the fs laser direct writing of LPFGs, the period is 100 μm, making the total length of the LPFG only 5 mm. The LPFGs can couple the guided mode to high-order cladding modes of second-order diffraction, resulting in a high RI sensitivity of 5265 nm/RI unit in the RI range of 1.433 ∼ 1.443 and a low-temperature sensitivity of ?15.52 pm/℃ from 20 ℃ to 500 ℃. In addition, the high transmittance biomimetic windows are produced by direct laser interference ablation. The interfered laser beams are introduced into the surface of a bare optical substrate, where structured surfaces consisting of a micropillar array are produced by the multiple exposure of the two-beam interference ablation. As an example of the application, zinc sulfide substrates are processed with this technology.

Ablation with Online Monitoring on Optical Fiber by Using 157-Nm (F2) Laser

Real-time Control of Micro/nanofiber Waist Diameter with Ultrahigh Accuracy and Precision

Ablation Efficiency of a Novel Thulium Fiber Laser: an in Vitro Study on Laser Setting and Fiber Usage.

157 nm laser micro-ablation of 3D-microstructures in optical fibers

3D Micro Ablation Technique of Transparent Materials using Deep Ultraviolet Laser

Femtosecond Laser Micromachining of Microfluidic Fiber Sensors

Numerical Simulation of Surface Topography Evolution During Pulsed CO2 Laser Ablation of Fiber

Laser-processing of Transparent Solid Materials for Advanced Photonic Device Applications

Ablation characteristics of femtosecond laser on wide band-gap ceramics

Micromachining & FBG fabrication using point by point technique utilizing femto-second laser

Fabrication of GaAs micro-optical components using wet etching assisted femtosecond laser ablation

Effects in Ultrafast Laser Micromachining PMMA-based Optical Fibre Grating

Femtosecond Laser Ablation of Microstructures in Fiber and Application in Magnetic Field Sensing

Femtosecond Laser One-Step Microfabrication Of Optical Fiber Inline Square Resonators For Chemical Sensing

Optical Modulation of Microfibers and Application to Ultrafast Fiber Lasers

Laser Micromachining of Microstructure Fibers with Femtosecond Pulses

Ablation Threshold and Material Removal Mechanisms of SiC Processed by Femtosecond Laser

Study on Fabrication of Fiber 3D Microstructures Based on Femtosecond Laser

The ablation process induced by femtosecond laser in transparent dielectrics

Controlling of Surface Ablation Threshold of Fused Silica by Double-Pulsed Femtosecond Laser

Microstructures Made in Optical Fiber with Femtosecond Laser