Abstract:The tempering process of plate glass involves rapidly cooling the high-temperature glass using an array of impinging air jets, inducing desired stress during cooling. Consequently, the formation of tempering stress results from the coupled interaction among flow, heat transfer, and stress. However, most previous studies have commonly neglected the influence of the flow field by assuming a uniform and constant distribution of heat transfer coefficients at different positions on the glass plate, which deviates from actual situations. This study employed a fluid-thermal-structural coupled simulation approach to predict the non-uniform residual stress distribution in tempered glass and investigate the interaction mechanisms among flow, heat transfer, and stress. Simultaneously, to validate the reliability of the method and model, this study experimentally investigated the single-nozzle jet impingement cooling for glass tempering. The study concluded that the simulation results were consistent with the experiment. Subsequently, a comparative analysis was performed between the fluid-thermal-structural coupled simulation results based on real boundary conditions and the thermal-structural coupled simulation results based on ideal uniform heat transfer coefficient boundary conditions. The results revealed non-uniform distributions of both heat transfer coefficient and temperature due to varying localized flow characteristics. Consequently, the ratio of surface compressive stress to internal tensile stress along the width direction of the glass was not a fixed value but ranged from 1.63 to 2.38. Furthermore, significant differences were observed in the stress distribution under the simulations of fluid-thermal-structural coupling and thermal-structural coupling. Therefore, it is recommended to employ the fluid-thermal-structural coupling method when predicting localized stress distribution.

Application of PLIC method in simulation of float glass forming

Numerical Simulation of Glass Bottle Forming Process

Finite Element Analysis on Non-Isothermal Glass Molding

SIMULATION OF TEMPERATURE FIELD IN FLOAT GLASS SPREAD PROCESS

Application of Orthogonal Test in Numerical Simulation of Glass Lens Molding

Simulation of Tin Penetration Process in the Surface Layer of Soda-Lime-Silica Float Glass

Influences of Model’s Shape on Molding Time in Glass Molding Press

Simulation of Tin Penetration in the Float Glass Process (float Glass Tin Penetration)

Numerical Simulation of Temperature Field of Melting Pools with Different Horizontal Width in the Bottom of Float Glass Furnace

A Volume-Conservative PLIC Algorithm on Three-Dimensional Fully Unstructured Meshes

Numerical Investigation of the Glass Melt Flow with Different Location of Water-Bag in Float Glass Furnace

Heater operation optimization in tin bath

Study on the Characteristics of Molten Glass in a Float Glass Process with a New Structure

Coupled fluid-thermal-structural analysis during the air cooling for glass tempering

INTEGRATED SIMULATION OF MELT FLOW, FIBER FRACTURE AND FIBER ORIENTATION FOR FIBER REINFORCED PLASTICS IN INJECTION MOLDING

Study The Formation Process Of Cuboid Microprotrusion By Glass Molding Process

Flow and Heat Transfer Simulation of Atmosphere in Tin Bath

Development of a Full PLIC-VOF Method for Mold Filling Simulation of High Pressure Die Casting Process

Prediction and Analysis of Borosilicate Glass Surface Deformation Induced by Flame Jet

Deformation Analysis of the Glass Preform in the Progress of Precision Glass Molding for Fabricating Chalcogenide Glass Diffractive Optics with the Finite Element Method

Aplication of Finite Element Method to Study on Glass Forming Process