Abstract:The tempering process of plate glass involves rapidly cooling the high-temperature glass using an array of impinging air jets, inducing desired stress during cooling. Consequently, the formation of tempering stress results from the coupled interaction among flow, heat transfer, and stress. However, most previous studies have commonly neglected the influence of the flow field by assuming a uniform and constant distribution of heat transfer coefficients at different positions on the glass plate, which deviates from actual situations. This study employed a fluid-thermal-structural coupled simulation approach to predict the non-uniform residual stress distribution in tempered glass and investigate the interaction mechanisms among flow, heat transfer, and stress. Simultaneously, to validate the reliability of the method and model, this study experimentally investigated the single-nozzle jet impingement cooling for glass tempering. The study concluded that the simulation results were consistent with the experiment. Subsequently, a comparative analysis was performed between the fluid-thermal-structural coupled simulation results based on real boundary conditions and the thermal-structural coupled simulation results based on ideal uniform heat transfer coefficient boundary conditions. The results revealed non-uniform distributions of both heat transfer coefficient and temperature due to varying localized flow characteristics. Consequently, the ratio of surface compressive stress to internal tensile stress along the width direction of the glass was not a fixed value but ranged from 1.63 to 2.38. Furthermore, significant differences were observed in the stress distribution under the simulations of fluid-thermal-structural coupling and thermal-structural coupling. Therefore, it is recommended to employ the fluid-thermal-structural coupling method when predicting localized stress distribution.

Simulation of Tin Penetration Process in the Surface Layer of Soda-Lime-Silica Float Glass

Simulation of Tin Penetration in the Float Glass Process (float Glass Tin Penetration)

Investigation of Tin Penetration at Bottom Surface of Float Borosilicate Glasses

Numerical Simulation of Glass Bottle Forming Process

Application of PLIC method in simulation of float glass forming

SIMULATION OF TEMPERATURE FIELD IN FLOAT GLASS SPREAD PROCESS

Investigating sulfur valence depth profile on float glass surfaces using electron probe microanalysis and stepwise etching

Flow and Heat Transfer Simulation of Atmosphere in Tin Bath

A Modified Random Network Model for P2O5–Na2O–Al2O3–SiO2 Glass Studied by Molecular Dynamics Simulations

Optical Simulation of the Saturation of TiO_2\FTO Coated Glass

Molecular Dynamic Simulation on Substrate Surface of Coating Glass

Fabrication and Visible Emissions of ZnO Nanocrystal Doped Transparent Zinc Silicate Glass-Ceramics

Phase Separation of Alkaline Earth Fluorosilicate Glass: A Strategy to Suppress Fluoride Evaporation

Coupled fluid-thermal-structural analysis during the air cooling for glass tempering

Effect of Pre-Oxidization Condition on Glass-to-metal Sealing

Heater operation optimization in tin bath

Long term stability of x-ray induced metastable defects in soda-lime-silica glass

Metastable Defects Induced by X-Ray Irradiation in Fe-Doped Soda-Lime Silicate Glass

Revealing the atomistic mechanisms of strain glass transition in ferroelastics

Modeling of ternary ion exchange and stress evolution in lithium‐containing glass

Study of SiCl4/H-2/O-2 Chemical Kinetics and Its Application to Fused Silica Glass Synthesis