Abstract:Silica glass ingot synthesis by flame hydrolysis deposition (FHD) is an important approach to obtain high-purity synthetic silica glass with high refractive index homogeneity. Using the precursor of silicon tetrachloride (SiCI4), the silica ingot (SiO2) can be synthesized in the oxy-hydrogen diffusion flame through a set of kinetic reactions and subsequent cooling. The homogeneity of the synthetic silica glass is influenced by the temperature/diameter equality of silica droplets and the residue of radicals (e.g. OH) in the synthetic silica. In this study, the mixing system of oxy-hydrogen diffusion flame and silica droplets in a furnace were modeled by a Euler-Lagrange multi-phase model, where the interphase exchange of mass, momentum and energy between the gas phase molecules and liquid phase silica droplets during the formation and transportation of silica droplets were included. The silica droplets were tracked by a Lagrangian formulation that includes the discrete phase inertia, hydrodynamic drag, the force of gravity and the dispersion due to turbulent eddies. The molecular gas phase reactions are described by a simple kinetic mechanism involving the major species during the formation of molecular SiO2, with kinetic and thermodynamic parameters taken from the literature when available.The effect of initial equivalence ratio on the flame structure was analyzed in the study, where the high-temperature region is uniform over the glass ingot and the residue is limited at unity equivalence ratio. The probability distributions of silica droplet diameter and temperature were analyzed by employing a developed droplet growth model, where the condensation rate is controlled by the in situ SiO2 vapor concentration and the local flow-condition-determined mass transfer rate. The maximum diameter of silica droplets in the furnace is 1.39 x 10(-4) m, and the percentage of silica droplets decreases with the increasing of diameter. Two high probability regions were observed for the droplet temperature distribution, the temperature below 1500 K accounts for 40% of the total droplet number, and the temperature range between 3500 and 4500 K accounts for 58%. The droplet diameter on the ingot cap distributes in the range from 4 x 10(-5) to 9 x 10-5 m with approximately probability of 85%. The distribution of droplet temperature on the ingot cap is much uniform, with more than half (67%) of the droplets has the temperature between 3100 and 3200 K. (C) 2014 Elsevier Ltd. All rights reserved.

Study of SiCl4/H-2/O-2 Chemical Kinetics and Its Application to Fused Silica Glass Synthesis

SiCl4/H2/O2 Reaction Kinetics and Chemistry Acceleration Calculation

Detailed OMCTS/H 2 /O 2 chemical kinetics mechanism and its application in the fused silica glass synthesis

Modeling Analysis on the Silica Glass Synthesis in A Hydrogen Diffusion Flame

Design and Optimization of Substrate Placement for Large-Sized and High-Quality Fused Silica Glass by SiCl 4 Flame Hydrolysis Deposition

Effects of Precursors on Silica Particle Generation in CVD Synthesis for Fused Silica Glass

Modeling of silica synthesis in a laminar flame by coupling an extended population balance model with computational fluid dynamics

Effects of injection conditions on temperature and component distributions in a CVD furnace for large‐size silica glass

A Modified Random Network Model for P2O5–Na2O–Al2O3–SiO2 Glass Studied by Molecular Dynamics Simulations

Mechanisms and energetics of calcium aluminosilicate glass dissolution through ab initio molecular dynamics-metadynamics simulations

Effects of Gas Flow Rates on Fused Silica Glass

Numerical modeling of sintering and dehydroxylation of porous silica preform for low-hydroxyl silica glass fabrication

Porous media model with multiphase transport and solid mechanics bidirectional coupling for SiO 2 soot preform sintering process

Elementary Kinetics for Gas Phase Combustion of SiCl4 Based Mixtures

A detailed reaction mechanism for hexamethyldisiloxane combustion via experiments and ReaxFF molecular dynamics simulations

The Crucial Role of Transient Tri-Coordinated Oxygen in the Flow of Silicate Melts.

A simulation model of selective laser melting (SLM) of glass silica monolayer

The structure of CaO–MgO–Al2O3–SiO2 melts and glasses doped with FeOX–NiO

Molecular dynamics simulation of silica liquid and glass

Study on Preparation of Silica Sol by Silicon Dissolution & Dripping water glass Method

MOLECULAR DYNAMIC SIMULATION OF THE MELT OF OXIDE-FLUORIDE INDUSTRIAL SLAG-FORMING MIXTURE