Abstract:The tempering process of plate glass involves rapidly cooling the high-temperature glass using an array of impinging air jets, inducing desired stress during cooling. Consequently, the formation of tempering stress results from the coupled interaction among flow, heat transfer, and stress. However, most previous studies have commonly neglected the influence of the flow field by assuming a uniform and constant distribution of heat transfer coefficients at different positions on the glass plate, which deviates from actual situations. This study employed a fluid-thermal-structural coupled simulation approach to predict the non-uniform residual stress distribution in tempered glass and investigate the interaction mechanisms among flow, heat transfer, and stress. Simultaneously, to validate the reliability of the method and model, this study experimentally investigated the single-nozzle jet impingement cooling for glass tempering. The study concluded that the simulation results were consistent with the experiment. Subsequently, a comparative analysis was performed between the fluid-thermal-structural coupled simulation results based on real boundary conditions and the thermal-structural coupled simulation results based on ideal uniform heat transfer coefficient boundary conditions. The results revealed non-uniform distributions of both heat transfer coefficient and temperature due to varying localized flow characteristics. Consequently, the ratio of surface compressive stress to internal tensile stress along the width direction of the glass was not a fixed value but ranged from 1.63 to 2.38. Furthermore, significant differences were observed in the stress distribution under the simulations of fluid-thermal-structural coupling and thermal-structural coupling. Therefore, it is recommended to employ the fluid-thermal-structural coupling method when predicting localized stress distribution.

SIMULATION OF TEMPERATURE FIELD IN FLOAT GLASS SPREAD PROCESS

Numerical Simulation of Glass Bottle Forming Process

Numerical Simulation of Temperature Field of Melting Pools with Different Horizontal Width in the Bottom of Float Glass Furnace

Application of PLIC method in simulation of float glass forming

Finite Element Analysis on Non-Isothermal Glass Molding

Simulation and Analysis of Light Scattering by Air Bubble in Optical Glass

Flow and Heat Transfer Simulation of Atmosphere in Tin Bath

Numerical Investigation of the Glass Melt Flow with Different Location of Water-Bag in Float Glass Furnace

Modeling and Simulation for Glassware Pressing Process

Simulation of Tin Penetration in the Float Glass Process (float Glass Tin Penetration)

Study on the Characteristics of Molten Glass in a Float Glass Process with a New Structure

Simulation of Tin Penetration Process in the Surface Layer of Soda-Lime-Silica Float Glass

Coupled fluid-thermal-structural analysis during the air cooling for glass tempering

Heater operation optimization in tin bath

A simulation-based optimization approach for the heating process of precision glass molding

Three-dimensional Numerical Simulation of the Natural Gas Fired Floating Glass Furnace

Preliminary Analysis of Heating up Process for Glass Tempering

Application of Numerical Simulation and New Fining Index in Operating Parameters Optimization of Float Glass-Melting Furnace

Modeling of the thermal cooling of a glass plate on a metallic frame including radiation effects

Numerical Study of Temperature Distribution Control in Precision Glass Molding Furnace

Spray cooling heat transfer during glass tempering process and influencing factors on the quality of tempered glass