Abstract:In the design study of large-sized sodium-cooled fast reactors in Japan (JSFR), the suppression of gas entrainment (GE) phenomena at a free surface in the reactor vessel is very important to establish an economically superior design. However, the GE phenomena are highly non-linear and too difficult to be evaluated theoretically. Therefore, we are developing high-precision CFD method for gas-liquid two-phase flows to evaluate the GE phenomena accurately. To reproduce the GE phenomena by CFDs, there are three key issues, i.e. geometry dependency, interfacial dynamics and locality. Former two issues are already addressed by employing unstructured mesh schemes and a high-precision simulation method for gas-liquid two-phase flow based on the PLIC (Piecewise Linear Interface Calculation) method, respectively. In fact, the simulation results of the GE phenomena in a simple GE experiment showed good agreements with experimental data. Recently, therefore, we focus on the locality of the GE phenomena. In our previous study (presented in ICONE17), the two-dimensional unstructured adaptive mesh technique for single-phase flows was developed to address the third issue. The isotropic cell refinement method was employed and the connection cell method was proposed to eliminate the edge incompatibility. The verification/validation results showed that the developed unstructured adaptive mesh technique succeeded in providing a high-precision solution, even though a poor-quality distorted mesh at the initial state was employed. In this study, the unstructured adaptive mesh technique is extended to the numerical simulations of gas-liquid two-phase flows. The redistribution methods of two-phase flow variables are newly developed to satisfy the conservations of the variables, i.e. the volumes of gas and liquid phases, the location of interfaces and the momentum of each phase. This improved unstructured adaptive mesh technique for gas-liquid two-phase flows is validated by solving the well-known slotted disk revolution and dam-break problems. As a result, the unstructured adaptive mesh technique succeeds in maintaining the slotted-disk shape after one revolution and shows more than first order accuracy (grid convergence) in the slotted-disk revolution problem. In addition, thanks to the momentum-conservative formulation, the dam-break phenomenon is well simulated by the unstructured adaptive mesh technique. Especially, wave-breaking phenomena are simulated by refined cells near the gasliquid interface. It should be noted that these simulation results are obtained by using relatively small number of cells because of the efficient mesh adaptation by the unstructured adaptive mesh technique.

A Volume-Conservative PLIC Algorithm on Three-Dimensional Fully Unstructured Meshes

High-Precision Reconstruction Of Gas-Liquid Interface In Plic-Vof Framework On Unstructured Mesh

A High‐precision Unstructured Adaptive Mesh Technique for Gas–liquid Two‐phase Flows

A 3-Dimensional Volume of Fluid Method—PLIC3D

Unstructured Adaptive Mesh Technique for Gas-Liquid Two-Phase Flows

Efficient sequential PLIC interface positioning for enhanced performance of the three-phase VoF Method

High-Precision Calculation of Interface Normal on Non-Orthogonal Mesh

Development of a Volume of Fluid Method for Computing Interfacial Incompressible Fluid Flows

A PLIC VOF Method in 3-Dimension

PLIC-Net: A Machine Learning Approach for 3D Interface Reconstruction in Volume of Fluid Methods

AN IMPROVED PRESSURE CALCULATION METHOD FOR SIMULATIONS OF GAS–LIQUID TWO-PHASE FLOWS ON UNSTRUCTURED MESHES

A Geometric VOF Method for Interface Flow Simulations

A High-Precision Calculation Method for Interface Normal and Curvature on an Unstructured Grid.

Analytic Solution to the Piecewise Linear Interface Construction Problem and Its Application in Curvature Calculation for Volume-of-Fluid Simulation Codes

A Conservative Finite Volume-Particle Hybrid Method for Simulation of Incompressible Interfacial Flow

A Refined Volume-of-fluid Algorithm for Capturing Sharp Fluid Interfaces on Arbitrary Meshes

Direct Numerical Algorithm for Multiphase Flow with Free Surfaces and Interfaces.

- 1-development and validation of high-precision cfd method with volume-tracking algorithm for gas-liquid two-phase flow simulation on unstructured mesh i 1

A Generalized Coupled Level Set/volume-of-fluid/ghost Fluid Method for Detailed Simulation of Gas-Liquid Flows.

Accuracy and Stability Enhancements in the Incompressible Finite-Volume-particle Method for Multiphase Flow Simulations.

An Improved CIP-based Numerical Model for Simulating Free-Surface Flow with Adaptive Mesh