Abstract:A bench-scale reactor consisting of a natural gas burner and an electrically heated reactor housing a selective catalytic reduction (SCR) catalyst was constructed for studying elemental mercury (Hg(o)) oxidation under SCR conditions. A low sulfur Powder River Basin (PRB) subbituminous coal combustion fly ash was injected into the entrained-flow reactor along with sulfur dioxide (SO2), nitrogen oxides (NOx), hydrogen chloride (HCl), and trace Hg(o). Concentrations of Hg(o) and total mercury (Hg) upstream and downstream of the SCR catalyst were measured using a Hg monitor. The effects of HCl concentration, SCR operating temperature, catalyst space velocity, and feed rate of PRB fly ash on Hg(o) oxidation were evaluated. It was observed that HCl provides the source of chlorine for Hg(o) oxidation under simulated PRB coal-fired SCR conditions. The decrease in Hg mass balance closure across the catalyst with decreasing HCl concentration suggests that transient Hg capture on the SCR catalyst occurred during the short test exposure periods and that the outlet speciation observed may not be representative of steady-state operation at longer exposure times. Increasing the space velocity and operating temperature of the SCR led to less Hg(o) oxidized. Introduction of PRB coal fly ash resulted in slightly decreased outlet oxidized mercury (Hg2+) as a percentage of total inlet Hg and correspondingly resulted in an incremental increase in Hg capture. The injection of ammonia (NH3) for NOx reduction by SCR was found to have a strong effect to decrease Hg oxidation. The observations suggest that Hg(o) oxidation may occur near the exit region of commercial SCR reactors. Passage of flue gas through SCR systems without NH3 injection, such as during the low-ozone season, may also impact Hg speciation and capture in the flue gas.

Effect of Vanadium-Based Selective Catalytic Reduction Catalysts on Mercury Speciation Transformation

Mercury Oxidation Over A Vanadia-Based Selective Catalytic Reduction Catalyst

Effects of Coal-Fired Flue Gas Components on Mercury Removal by the Mechanochemical S-Modified Petroleum Coke

Mercury Removal from Coal Combustion Flue Gas by Mechanochemically Sulfur Modified Straw Coke and Its Mercury Stability

Factors Affecting Mercury Oxidation by SCR Catalysts

Influence of the SCR (Selective Catalytic Reduction)-based Nox Removal System on Mercury Morphology in Coal-fired Flue Gas

Mercury Removal over the Vanadia–titania Catalyst in CO2-enriched Conditions

Deactivation Effect of Elemental Mercury Oxidation over a V2O5-WO3/TiO2 Catalyst by Pb in Simulated Coal-Fired Flue Gas

Experimental Research on Mercury Catalytic Oxidation over Ce Modified SCR Catalyst

Mercury oxidation promoted by a selective catalytic reduction catalyst under simulated Powder River Basin coal combustion conditions

Mercury removal using various modified V/Ti-based SCR catalysts: A review

The Effect of Cr Addition on Hg0 Oxidation and NO Reduction over V2O5/TiO2 Catalyst

Tuning of vanadium valence for value-added recycling and utilization of vanadium from spent Selective Catalytic Reduction Catalysts

Elemental Mercury Removal from Coal Gas by CeMnTi Sorbents and Their Regeneration Performance

Effects of Cerium and Vanadium on the Activity and Selectivity of MnOx-TiO2 Catalyst for Low-Temperature NH3-SCR

Progress in Catalytic Oxidation Technology for Element Mercury in Coal-fired Flue Gas

Effect of flue gas components on the NO removal and element mercury oxidation performance of Mn-modified low-temperature catalyst

Comparison of Elemental Mercury Oxidation Across Vanadium and Cerium Based Catalysts in Coal Combustion Flue Gas: Catalytic Performances and Particulate Matter Effects.

Significance of RuO2 Modified SCR Catalyst for Elemental Mercury Oxidation in Coal-fired Flue Gas

Impacts of halogen additions on mercury oxidation, in a slipstream selective catalyst reduction (SCR), reactor when burning sub-bituminous coal

Effect of Various Flue Gas Compositions on Mercury Speciation Transformation During Coal Combustion