Abstract:In this work, the effectiveness of V2O5-WO3/TiO2 catalysts modified with different CeO2 contents by impregnation and co-precipitation methods on the selective catalytic reduction of NOx by NH3 have been studied comparatively by various experimental techniques. The results showed that the NO conversion of V2O5-WO3/CeO2-TiO2 catalysts modified by co-precipitation method obviously increased with the Ce doping contents in the studied range below 20% (All Ce contents are in mass fractions), but the NO conversion of V2O5-WO3/CeO2/TiO2 catalysts modified by impregnation methods was lower than V2O5-WO3/CeO2-TiO2 catalysts especially beyond 2.5% Ce doping contents. The V2O5-WO3/CeO2-TiO2 catalysts showed better SCR activity, wider reaction window, and higher sulfur and water resistance. The characterization results elucidated that the modified catalysts by co-precipitation method exhibited higher specific surface area, much better dispersity of Ce component, more Ce3+ species and more Brønsted acid sites than that by impregnation. The vacancies caused by more Ce3+ species were favorable for more NO oxidation to NO2, and the interaction between Ce species and WOx species generated more Brønsted acid sites. It could be supposed that dispersed CeOx species and WOx species offered more second active centers respectively to adsorb oxygen and activate ammonia as co-catalysis to the primary active center of V ions, thus facilitated the better SCR activity of modified V2O5-WO3/CeO2-TiO2 catalysts by co-precipitation methods. The co-precipitation methods with Ce component were more suitable for production of modified commercial V2O5-WO3/TiO2 catalysts.

Experimental Research on Mercury Catalytic Oxidation over Ce Modified SCR Catalyst

Investigation on the redox/acidic features of bimetallic MOF-derived CeMOx catalysts for low-temperature NH3-SCR of NOx

Hg0 Catalytic Oxidation by HBr over Ce-modified Regenerated Selective Catalytic Reduction Catalyst

Investigation on Elemental Mercury Removal and Antideactivation Performance of Modified SCR Catalysts

Synergistic catalytic oxidation of Hg0 and NH3-SCR of NO over MnCeTiOx catalyst in flue gas

Effect of temperature and hydrochloric acid concentration on mercury oxidation ability of modified SCR catalyst

Preliminary Study on Mercury Conversion Performance of Modified SCR Catalyst

Mercury Oxidation Over A Vanadia-Based Selective Catalytic Reduction Catalyst

Effect of Ce Doping into V2O5-WO3/TiO2 Catalysts on the Selective Catalytic Reduction of NOx by NH3

Study on H2O2, Ce, W modified MnO /TiO2 based NH3-SCR Catalyst: The status and effect of doped promoters and synergies

CeO2 based catalysts for elemental mercury capture

Promotional Effect of H2O2 Modification on the Cerium-Tungsten-titanium Mixed Oxide Catalyst for Selective Catalytic Reduction of NO with NH3

Promotional effect of Ce in NH3-SCO and NH3-SCR reactions over Cu-Ce/SCR catalysts

Significance of Fe2O3 Modified SCR Catalyst for Gas-Phase Elemental Mercury Oxidation in Coal-Fired Flue Gas

Photo- and thermo-catalytic mechanisms for elemental mercury removal by Ce doped commercial selective catalytic reduction catalyst (V2O5/TiO2)

In-Situ Construction of Halogen MOFs Bifunctional Catalysts for Synergistic Removal of NO and Hg0

Mercury Removal over the Vanadia–titania Catalyst in CO2-enriched Conditions

Oxidation Efficiency of Elemental Mercury in Flue Gas by SCR De-NOx Catalysts

Effects of doping Mn, Cu and Fe oxides on polyhedron CeO2 catalyst during NH3-SCR reaction

Promotional Effect of Ce-Doped V2o5-Wo3/Tio2 with Low Vanadium Loadings for Selective Catalytic Reduction of Nox by Nh3

To be support or promoter: the mode of introducing ceria into commercial V2O5/TiO2 catalyst for enhanced Hg0 oxidation