Abstract:High surface area SiO2–TiO2–V2O5 (STV) catalysts of various titania loadings were synthesized by a sol–gel method. The STV catalysts were tested for oxidation of elemental mercury (Hg0) and its capture in simulated coal combustion flue gas representing those from combustion of low-rank coals (sub-bituminous and lignite). Experiments were conducted in a fixed-bed reactor at temperatures ranging from 26 to 400°C. In simulated flue gas, Hg0 oxidation efficiency over the STV catalysts was found to decrease dramatically from 135 to 300°C. At typical selective catalytic reduction (SCR) operating temperatures, the catalyst's oxidation activity increased as titania loading of the STV catalysts increased up to 18wt%. The reaction mechanisms over the STV catalysts at SCR operating temperatures were investigated using individual flue gas components (HCl, NO, SO2 and H2O) with O2 balanced in N2. Hg0 oxidation over STV catalysts follows the Eley–Rideal mechanism where active surface species generated from adsorbed flue gas components react with gas-phase or weakly adsorbed Hg0. Fresh STV catalysts had some capability for adsorbing oxidized mercury (Hg2+) at 350°C, and no obvious effect of the adsorbed Hg2+ on subsequent Hg0 oxidation was observed. The presence of HCl with O2 had excellent oxidation and capture efficiency; however, without O2 it remarkably inhibited Hg0 adsorption on the STV catalysts. NO and SO2 promoted Hg0 oxidation and capture in the presence of O2, but their promotional effects were insignificant in the absence of O2. Water vapor showed prohibitive effects on Hg0 oxidation due to its competition with reactive species such as HCl and NO for active adsorption sites. This study demonstrates the feasibility of using STV catalysts for Hg0 removal at typical SCR operating temperatures. The identification of the reaction mechanism provides critical information for developing effective SCR catalysts for Hg0 oxidation in coal combustion flue gas.

Mercury Removal over the Vanadia–titania Catalyst in CO2-enriched Conditions

Effects of Coal-Fired Flue Gas Components on Mercury Removal by the Mechanochemical S-Modified Petroleum Coke

Influence of Flue Gas Components on the Mercury Adsorption/oxidation by Mechanochemical S2Cl2-modified Sawdust Coke

Elemental Mercury Removal over CeO2/TiO2 Catalyst Prepared by Sol–Gel Method

[Removal of Gaseous Elemental Mercury over Cerium Doped Low Vanadium Loading V2O5-WO3/TiO2 in Simulated Coal-Fired Flue Gas].

Mercury Oxidation Over A Vanadia-Based Selective Catalytic Reduction Catalyst

Removal of gaseous elemental mercury over a CeO2–WO3/TiO2 nanocomposite in simulated coal-fired flue gas

Simultaneous Removal of NO and Hg0 from Flue Gas over MnSmCo/Ti Catalyst at Low Temperature

Removal of elemental mercury from flue gas by supported MnOx/ Al2O3 catalyst at low temperature

Synergistic catalytic oxidation of Hg0 and NH3-SCR of NO over MnCeTiOx catalyst in flue gas

Elemental Mercury (hg0) Removal from Containing SO2/NO Flue Gas by Magnetically Separable Fe2.45Ti0.55O4/H2O2 Advanced Oxidation Processes

Elemental Mercury Removal from Flue Gas Using Heat and Co2+/Fe2+ Coactivated Oxone Oxidation System

SCR Atmosphere Induced Reduction of Oxidized Mercury over CuO/CeO2-TiO2 Catalyst.

Integrated removal of NO and mercury from coal combustion flue gas using manganese oxides supported on TiO2.

Significance of Fe2O3 Modified SCR Catalyst for Gas-Phase Elemental Mercury Oxidation in Coal-Fired Flue Gas

Catalytic Oxidation of Elemental Mercury in Coal-Combustion Flue Gas over the CuAlO2 Catalyst

Oxidation and capture of elemental mercury over SiO2–TiO2–V2O5 catalysts in simulated low-rank coal combustion flue gas

Speciation of mercury formed on MnOx-CeO2/γ-Al2O3 catalyst surface

Ag-Mo Modified SCR Catalyst for a Co-Beneficial Oxidation of Elemental Mercury at Wide Temperature Range

Removal of Elemental Mercury by Ce and Co Modified MCM‐41 Catalyst from Simulated Flue Gas

Simultaneous Removal of Hg-0 and No from Flue Gas by Co-0.3-Ce-0.35-Zr0.35o2 Impregnated with Mnox