Abstract:<section class="article-section__content"><h3 class="article-section__sub-title section1"> BACKGROUND</h3><p>Selective catalytic reduction (SCR) of NO<sub>X</sub> has been the most widely used technique for the reduction of NO<sub>X</sub> emissions from combustion flue gas. MnO<sub>X</sub>/FeO<sub>X</sub> based catalysts typically can attain high NO<sub>X</sub> conversion at low temperature but inferior water vapor resistance. </p></section><section class="article-section__content"><h3 class="article-section__sub-title section1"> RESULTS</h3><p>A MnO<sub>X</sub>/FeO<sub>X</sub> catalyst was synthesized by the sonicated co‐precipitation method and then wash‐coated on ceramic cordierite monoliths to form a low pressure drop monolithic catalyst suitable for high flowrate flue gas treatment conditions. The catalyst achieved above 90% NO conversion at a gas hourly space velocity (GHSV) of 30,000 h<sup>‐1</sup> over a 125‐225 °C temperature window under simulated industrial flue gas conditions. In the presence of up to 5% H<sub>2</sub>O vapor, comparable performance was retained for a reduced temperature window of ≥150 °C. In order to improve water resistance and LT‐SCR performance, an optimal 10% w/w PTFE doped MnO<sub>X</sub>/FeO<sub>X</sub> catalyst was developed, which exhibited remarkably high performance of up to 98% NO conversion, with improved water resistance at up to 10% v/v H<sub>2</sub>O while retaining high performance from 100 °C. </p></section><section class="article-section__content"><h3 class="article-section__sub-title section1"> CONCLUSION</h3><p>Monolithic MnO<sub>X</sub>/FeO<sub>X</sub> catalyst incorporating PTFE significantly improved NO conversion and water vapour resistance due to the enhanced NH<sub>3</sub> adsorption associated with Lewis acid sites and water repellent property. These findings will provide guidance for researchers in this field to adapt F based or similar additives into the making of high performance and high water resistance catalysts either to retrofit existing catalyst synthesis procedures or reinvent a novel catalyst at scalable but economical way. </p><p>This article is protected by copyright. All rights reserved.</p></section>

Effect of flue gas components on the NO removal and element mercury oxidation performance of Mn-modified low-temperature catalyst

Mechanistic Study on the Enhanced SO2-tolerant Ability of CuCl2-promoted MnOx-CeOx Mixed Oxide for Hg0 Removal

Effects of Coal-Fired Flue Gas Components on Mercury Removal by the Mechanochemical S-Modified Petroleum Coke

Influence of Flue Gas Components on the Mercury Adsorption/oxidation by Mechanochemical S2Cl2-modified Sawdust Coke

Efficient MnFeW/Ti catalyst for simultaneous removal of NO and Hg0 in flue gas at low temperature: Effect of NO on Hg0 oxidation and reaction mechanism

Synergistic catalytic oxidation of Hg0 and NH3-SCR of NO over MnCeTiOx catalyst in flue gas

Study on SO 2 Poisoning and Regeneration of the Low-Temperature Fe–Sn–Mn/TiO 2 Catalyst for Simultaneous Removal of NO x and Mercury

Enhanced performance and SO2 tolerance of Ce modified TiO2 supported Mn Sm catalyst for synergetic removal of Hg0 and NO from flue gas

Using CuO-MnOx/AC-H as catalyst for simultaneous removal of Hg° and NO from coal-fired flue gas.

A Dual-Functional MnO2/La0.6Sr0.4MnO3 Composite Catalyst: High-Efficiency for Elemental Mercury Oxidation in Flue Gas

Synergetic Removal of Elemental Mercury and NO over TiCe0.25Sn0.25Ox Catalysts from Flue Gas: Performance and Mechanism Study

SO 2 and H 2 O Poisoning Resistance of Manganese Oxide-Based Catalysts for Low-Temperature Selective Catalytic Reduction of NO X

Adsorption and catalytic oxidation of gaseous elemental mercury in flue gas over MnOx/Alumina

Mercury Removal over the Vanadia–titania Catalyst in CO2-enriched Conditions

Synergistic effect of HCl, SO2 and O2 on mercury removal by Mn0.5Cu0.5Fe2O4 adsorbent

Satisfactory Anti-Interference and High Performance of the 1Co-1Ce/Mn@ZSM-5 Catalyst for Simultaneous Removal of NO and Hg0 in Abominable Flue Gas.

Mechanistic Investigation of the Enhanced SO2 Resistance of Co-modified MnOx Catalyst for the Selective Catalytic Reduction of NOx by NH3

Sulfur/water resistance and regeneration of MnO -CeO2/TiO2 catalyst for low-temperature selective catalytic reduction of NO

Low-temperature SCR of NOx by NH3 over MnOx/SAPO-34 prepared by two different methods: a comparative study

Rational modulation of redox equilibrium over Mn modified Ce-Sn catalyst for low-temperature elimination of NO and Hg 0

Synthesis and characterisation of monolithic PTFE ‐modified MnO X / FeO X catalysts for selective catalytic reduction ( SCR ) of NO X at low temperature