Abstract:A bench-scale reactor consisting of a natural gas burner and an electrically heated reactor housing a selective catalytic reduction (SCR) catalyst was constructed for studying elemental mercury (Hg(o)) oxidation under SCR conditions. A low sulfur Powder River Basin (PRB) subbituminous coal combustion fly ash was injected into the entrained-flow reactor along with sulfur dioxide (SO2), nitrogen oxides (NOx), hydrogen chloride (HCl), and trace Hg(o). Concentrations of Hg(o) and total mercury (Hg) upstream and downstream of the SCR catalyst were measured using a Hg monitor. The effects of HCl concentration, SCR operating temperature, catalyst space velocity, and feed rate of PRB fly ash on Hg(o) oxidation were evaluated. It was observed that HCl provides the source of chlorine for Hg(o) oxidation under simulated PRB coal-fired SCR conditions. The decrease in Hg mass balance closure across the catalyst with decreasing HCl concentration suggests that transient Hg capture on the SCR catalyst occurred during the short test exposure periods and that the outlet speciation observed may not be representative of steady-state operation at longer exposure times. Increasing the space velocity and operating temperature of the SCR led to less Hg(o) oxidized. Introduction of PRB coal fly ash resulted in slightly decreased outlet oxidized mercury (Hg2+) as a percentage of total inlet Hg and correspondingly resulted in an incremental increase in Hg capture. The injection of ammonia (NH3) for NOx reduction by SCR was found to have a strong effect to decrease Hg oxidation. The observations suggest that Hg(o) oxidation may occur near the exit region of commercial SCR reactors. Passage of flue gas through SCR systems without NH3 injection, such as during the low-ozone season, may also impact Hg speciation and capture in the flue gas.

Influence of the SCR (Selective Catalytic Reduction)-based Nox Removal System on Mercury Morphology in Coal-fired Flue Gas

Effects of Coal-Fired Flue Gas Components on Mercury Removal by the Mechanochemical S-Modified Petroleum Coke

Influence of Flue Gas Components on the Mercury Adsorption/oxidation by Mechanochemical S2Cl2-modified Sawdust Coke

Mercury Removal from Coal Combustion Flue Gas by Mechanochemically Sulfur Modified Straw Coke and Its Mercury Stability

Mercury Removal Mechanism of Mechanochemical Sulfur Modified Straw Coke: Density Functional Theory Calculation and Kinetic Fitting

Effect of Flue-gas Cleaning Devices on Mercury Emission From Coal-fired Boiler

Effect of Vanadium-Based Selective Catalytic Reduction Catalysts on Mercury Speciation Transformation

Factors Affecting Mercury Oxidation by SCR Catalysts

Influence of NH3on Hg0 Oxidation Performance of SCR Catalyst

Effects of CO and CO2 on the Removal of Elemental Mercury over Carbonaceous Surfaces

Progress in Catalytic Oxidation Technology for Element Mercury in Coal-fired Flue Gas

Mercury Removal over the Vanadia–titania Catalyst in CO2-enriched Conditions

Mercury oxidation promoted by a selective catalytic reduction catalyst under simulated Powder River Basin coal combustion conditions

Fixed-bed Experimental Evaluation of Carbon Performance on Elemental Mercury Adsorption

A review on enhancing sulfur-resistant capacity and magnetism of adsorbent for mercury removal from coal fired flue gas

Effect of the Existing Air Pollutant Control Devices on Mercury Emission in Coal-Fired Power Plants

Significance of RuO2 Modified SCR Catalyst for Elemental Mercury Oxidation in Coal-fired Flue Gas

Mercury Oxidation Over A Vanadia-Based Selective Catalytic Reduction Catalyst

An Experimental Study on Coal-Char Sorbents for Gas-Phase Mercury Removal from Flue Gas

Influence and Control of Electrostatic Precipitators and Wet Flue Gas Desulfurization Systems on the Speciation of Mercury in Flue Gas

Impacts of halogen additions on mercury oxidation, in a slipstream selective catalyst reduction (SCR), reactor when burning sub-bituminous coal