Abstract:A bench-scale reactor consisting of a natural gas burner and an electrically heated reactor housing a selective catalytic reduction (SCR) catalyst was constructed for studying elemental mercury (Hg(o)) oxidation under SCR conditions. A low sulfur Powder River Basin (PRB) subbituminous coal combustion fly ash was injected into the entrained-flow reactor along with sulfur dioxide (SO2), nitrogen oxides (NOx), hydrogen chloride (HCl), and trace Hg(o). Concentrations of Hg(o) and total mercury (Hg) upstream and downstream of the SCR catalyst were measured using a Hg monitor. The effects of HCl concentration, SCR operating temperature, catalyst space velocity, and feed rate of PRB fly ash on Hg(o) oxidation were evaluated. It was observed that HCl provides the source of chlorine for Hg(o) oxidation under simulated PRB coal-fired SCR conditions. The decrease in Hg mass balance closure across the catalyst with decreasing HCl concentration suggests that transient Hg capture on the SCR catalyst occurred during the short test exposure periods and that the outlet speciation observed may not be representative of steady-state operation at longer exposure times. Increasing the space velocity and operating temperature of the SCR led to less Hg(o) oxidized. Introduction of PRB coal fly ash resulted in slightly decreased outlet oxidized mercury (Hg2+) as a percentage of total inlet Hg and correspondingly resulted in an incremental increase in Hg capture. The injection of ammonia (NH3) for NOx reduction by SCR was found to have a strong effect to decrease Hg oxidation. The observations suggest that Hg(o) oxidation may occur near the exit region of commercial SCR reactors. Passage of flue gas through SCR systems without NH3 injection, such as during the low-ozone season, may also impact Hg speciation and capture in the flue gas.

Influence of NH3on Hg0 Oxidation Performance of SCR Catalyst

Factors Affecting Mercury Oxidation by SCR Catalysts

Influence of Flue Gas Components on the Mercury Adsorption/oxidation by Mechanochemical S2Cl2-modified Sawdust Coke

Effects of Coal-Fired Flue Gas Components on Mercury Removal by the Mechanochemical S-Modified Petroleum Coke

Progress in Catalytic Oxidation Technology for Element Mercury in Coal-fired Flue Gas

Impacts of halogen additions on mercury oxidation, in a slipstream selective catalyst reduction (SCR), reactor when burning sub-bituminous coal

Influence of the SCR (Selective Catalytic Reduction)-based Nox Removal System on Mercury Morphology in Coal-fired Flue Gas

A review on enhancing sulfur-resistant capacity and magnetism of adsorbent for mercury removal from coal fired flue gas

Mercury oxidation promoted by a selective catalytic reduction catalyst under simulated Powder River Basin coal combustion conditions

Significance of RuO2 Modified SCR Catalyst for Elemental Mercury Oxidation in Coal-fired Flue Gas

Synergistic catalytic oxidation of Hg0 and NH3-SCR of NO over MnCeTiOx catalyst in flue gas

Commercial SCR catalyst modified with different noble metals (Ag, Pt, Pd) to efficiently remove slip ammonia and NOx in the flue gas

RESEARCH ACHIEVEMENTS OF CATALYSTS FOR SCR DENITRIFICATION BY NH3 AND HYDROCARBON

The influence of flue gas components and activated carbon injection on mercury capture of municipal solid waste incineration in China

The Poisoning Mechanisms of Different Zinc Species on a Ceria-Based NH3-SCR Catalyst and the Co-Effects of Zinc and Gas-Phase Sulfur/chlorine Species.

Mercury Oxidation Over A Vanadia-Based Selective Catalytic Reduction Catalyst

Low-Temperature NH3-SCR Technology for Industrial Application of Waste Incineration: An Overview of Research Progress

Progress on selective catalytic oxidation of ammonia (NH 3 ‐SCO) over Ag-based catalysts

New insight into the intrinsic effect of sulfur dioxide on Hg0 oxidation in the absence/presence of SCR atmosphere

Development of SSZ-13 Based Sulfur Resistant NH 3 -SCR Catalysts

Low-Temperature SCR Catalyst Development and Industrial Applications in China