Abstract:Serrated chips, consisting of extremely uneven plastic deformation, are a prominent feature of high-speed machining of difficult-to-machine materials. This paper focuses on the evolution of chip form, chip morphology features (chip free surface, tool-chip contact surface, and chip edge), and chip segment parameters in subsequent high-speed ( v c =50 and 150 m min −1 ) machining of selective laser melted (SLMed) Ti6Al4V alloys, which are significantly different from conventional Ti6Al4V alloy in microstructure, mechanical properties and machinability. The effect of laser beam scanning schemes (0°, 67.5°, and 90°), machined surfaces (top and front), and cutting speeds on serrated chip characteristics of SLMed Ti6Al4Valloys was investigated. Based on the Johnson-Cook constitutive model of SLMed Ti6Al4V alloys, an orthogonal cutting model was developed to better understand the effect of physical-mechanical properties on the shear localization, which dominates the formation mechanism of serrated chips in post-machining of SLMed Ti6Al4V alloy. The results showed that the critical cutting speed (CCS) for chip serration of SLMed Ti6Al4V alloy is lower than that for serrated chips of conventional Ti6Al4V alloy, and the serrated profile of SLMed Ti6Al4V chips was more regular and pronounced. Besides, due to anisotropic microstructure and mechanical properties of SLMed Ti6Al4V alloys, the serration degree of chips produced on the top surfaces of SLMed Ti6Al4V alloys is more prominent than that of chips generated on the front surfaces. In addition, because of the poor deformation coordination and high plastic flow stresses of needle-like martensite α′, the plastic flow and grain distortion in the adiabatic shear band (ASB) of SLMed Ti6Al4V chips are significantly smaller than those in the ASB of conventional Ti6Al4V with equiaxed grains.

Microscopic Examination of Primary Shear Zone in High Speed Machining of Hardened High Strength Steel

Understanding The Deformation Of Metals In High Speed Cutting

Simulation of Chip Formation in High-Speed Hard Machining

Finite Element Analysis of Adiabatic Shear Band Formation in Titanium Alloy Cutting Process

Chip Formation Mechanism in Dry Hard High-Speed Orthogonal Turning of Hardened AISI D2 Tool Steel with Different Hardness Levels

Microstructural Evolution of Shear Localization in High-Speed Cutting of CoCrFeMnNi High-Entropy Alloy

Effect of cutting conditions on the serrated chip formation in high-speed cutting

Serrated chip characteristics and formation mechanism in high-speed machining of selective laser melted Ti6Al4V alloys

Microhardness Prediction Based on a Microstructure-Sensitive Flow Stress Model During High Speed Machining Ti-6Al-4V

Analysis Study of Adiabatic Shear Band in Ultra-High Strength Low Alloy Steel Plate

Dynamic behavior and formation mechanism of shear band during high-speed cutting Inconel 718

The Surface Integrity in Machining Hardened Steel Skd11 for Die and Mold

The Comparative Studies on the Surface Integrity in Milling and Grinding Hardened Steel SKD11

Effect of Tempering Conditions on Secondary Hardening of Carbides and Retained Austenite in Spray-Formed M42 High-Speed Steel

Experimental Study on the Surface Integrity and Chip Formation in the Micro Cutting Process

Inter-Critically Reheated CGHAZ of Ultra-High-Strength Martensitic Steel with Different Cooling Rates

Analysis of Chip Morphology in Heavy Milling of 508III Steel Considering Different Tool Wear Conditions

Study on the Microstructure of White Layer during Precision Hard Part Machining

Microstructural Evolution, Behavior of Precipitates, and Mechanical Properties of Powder Metallurgical High-Speed Steel S390 During Tempering

On Critical Condition under Adiabatic Shear in High Speed Machining

Experimental Study on Chip Shape and Tool Wear of High-Speed and Micro-Feed Cutting