Abstract:Creep−feed grinding of high−strength steel is prone to excessive wheel wear and thermal damage defects, which seriously affects the service performance of parts. To solve the above−−mentioned issue, a creep−feed grinding test was carried out on high−strength steel using SG and CBN abrasive wheels. The grindability of high−strength steel was scrutinized in terms of grinding force, machining temperature and grinding specific energy. Moreover, the effects of operation parameters and grinder performances on the surface integrity of the workpiece such as surface morphology, roughness, residual stress and hardness were rigorously studied. The results indicate that, when the instantaneous high temperature in the grinding area reaches above the phase transition temperature of the steel, the local organization of the surface layer changes, leading to thermal damage defects in the components. The outstanding hardness and thermal conductivity of CBN abrasives are more productive in suppressing grinding burns than the high self−sharpening properties of SG grits and a more favorable machining response is achieved. The effects of thermal damage on the surface integrity of high−strength steel grinding are mainly in the form of oxidative discoloration, coating texture, hardness reduction and residual tensile stresses. Within the parameter range of this experiment, CBN grinding wheel reduces grinding specific energy by about 33% compared to SG grinding wheel and can control surface roughness below 0.8 μm. The weight of oxygen element in the burn−out workpiece accounts for 21%, and the thickness of the metamorphic layer is about 40 μm. The essential means of achieving burn−free grinding of high−strength steels is to reduce heat generation and enhance heat evacuation. The results obtained can provide technical guidance for high−quality processing of high−strength steel and precision manufacturing of high−end components.

The Comparative Studies on the Surface Integrity in Milling and Grinding Hardened Steel SKD11

Comparative Study On The Surface Qualities In Grinding And Milling Hardened Steel Skd11

The Surface Integrity in Machining Hardened Steel Skd11 for Die and Mold

EXPERIMENT ON SURFACE INTEGRITY OF MILLING TOOL FOR HARDENED STEEL SKD11

Study on Surface Integrity in Hard Milling of Hardened Die Steel

Numerical Investigation of the Evolution of Grit Fracture and Its Impact on Cutting Performance in Single Grit Grinding

Study on surface grind-hardening of SKD-11 hardened steel

Experimental Study on the Hardened Surface Layer of Grinding SKD-11 Hardened Steel

Study on the Effect of Grinding Parameters to the White Layer Formation in Grinding SKD-11 Hardened Steel

Experimental investigation on hard milling of high strength steel using PVD-AlTiN coated cemented carbide tool

Analysis of Grindability and Surface Integrity in Creep−Feed Grinding of High−Strength Steels

Experiment Study on Cutter Disrepair Principle and Optimization for Machining Heat-Resistant Steel

Study on Performance of PVD AlTiN Coatings and AlTiN-Based Composite Coatings in Dry End Milling of Hardened Steel SKD11

ASSESSMENT OF WEAR AND DESTRUCTION OF SOLID CARBIDE CUTTERS DURING MILLING OF HARDENED STEEL 4X5MF1C WITH A HARDNESS OF 52 HRC

Study on the Work Hardening and Metamorphic Layer Characteristics of Milling Contour Bevel Gears

Comparison in surface integrity and fatigue performance for hardened steel ball-end milled with different milling speeds

Surface modification of ultrahigh strength 300M steel under supercritical carbon dioxide (scCO2)-assisted grinding process

Machinability study on hard milling of ultra-high strength steel 30CR3SiNiMoVA

Surface integrity optimization for ball-end hard milling of AISI D2 steel based on response surface methodology

Process parameter optimization and surface integrity evolution in the high-speed grinding of TiAl intermetallics based on grey relational analysis method

Simulation and Experiment of Micro-surface in Pre-stressed Hardening Grinding Process