Abstract:Nano-materials are potential substitutes for micro-sized solid propellant ingredients for improving energy density and reaction activity. So far, several nano-carbides act as accelerants for boron (B) oxidation reaction but their promotive effects and corresponding action mechanisms have rarely been reported. In this work, four nano-carbides [nano-boron carbide (nB(4)C), nano-titanium carbide (nTiC), nano-zirconium carbide (nZrC), and nano-silicon carbide (nSiC)] were evaluated by thermogravimetric differential scanning calorimetry-combined thermal analysis system and thermodynamic software FactSage 6.2. Among the four nano-carbides, nTiC ranked as the best accelerant by reducing the initial oxidation temperature of B by 10.7% and increasing heat release by 16.0%. By comparison, nB(4)C and nZrC were ranked as second and third best accelerants with abilities of decreasing the initial oxidation temperature (by 5.4% and 3.3%, respectively) and raising heat release (both by 6.2%). On the other hand, though nSiC slightly decreases the initial oxidation temperature of B, heat release of B + nSiC was lower than that of original B. The action mechanisms of nano-carbides were found complex, and one nano-carbide can accelerate B oxidation following one or several approaches. First, the nano-carbide can be oxidized before B to offer extra heat and induce the oxidation of B. The produced gaseous oxidation product CO2 by nano-carbide may then help break down the liquid oxide film deposited on B particle surface. Third, the reaction between nano-carbide and B would generate borides, which may diminish accumulated liquid oxide film at low temperatures. Finally, the corresponding oxide will be produced to catalyze the oxidation of B. Overall, these findings look promising for future performance improvement of B-based solid propellants.

Microwave synthesis of nano-boron carbide powder

Preparation of Submicron Boron Carbide Powder Through Gas-Solid Reaction Method

Synthesis of Boron Carbide Powder Through Gas-Solid Reaction Method Using Nanoporous Carbon As Carbon Source

Fast Synthesis of Fine Boron Carbide Powders Using Electromagnetic Induction Synthesis Method

Carbothermal Reduction Synthesis Of Zirconium Diboride Powders Assisted By Microwave

Combustion synthesized boron carbide powders by different organic carbon sources and microwave absorbing properties

Production of boron carbide powder by carbothermal synthesis of gel material

Novel Pathway for the Combustion Synthesis and Consolidation of Boron Carbide

Influence of Length-Scale on Stabilization of Boron Carbide in Al-based Metal Matrix Composites During Plasma Activated Sintering

Preparation of Monophasic Tungsten boride powder from Tungsten and boron carbide

Synthesis of Ultra-Fine and High-Pure Zirconium Diboride Powders Using Solution-Based Processing

Preparation of nano-scaled WC powder by low-temperature carbothermic reduction method

Nano-carbides As Accelerants for Boron Oxidation Reaction

Experimental Investigation on the Mass Diffusion Behaviors of Calcium Oxide and Carbon in the Solid-State Synthesis of Calcium Carbide by Microwave Heating

Preparation of novel carborane-containing boron carbide precursor and its derived ceramic hollow microsphere

Synthesis of Near-Spherical BN Powders by Templated Carbothermal Reduction and Nitridation

Preparation of dense B4C ceramics by spark plasma sintering of high-purity nanoparticles

Microwave synthesis of BaTiO3 from BaCO3 and TiO 2

Fabrication and characterization of hot-pressed B-rich boron carbide

The Hydrothermal Method of Preparing Boron–Saccharide Precursors for the Synthesis of Boron Carbide and Its Influence on the Morphology and Phase Composition of the Obtained Products

Synthesis and Thermal Oxidation Resistance of Boron-Rich Boron-Carbide Material