Abstract:Boron carbide (B4C) is one of the main products from the primary combustion of boron (B)-based propellants and has a significant influence on the secondary combustion of B. To systematically evaluate its effects on the secondary combustion of B, mixtures of B4C and B in different mass ratios were prepared. To study the ignition temperatures and combustion flames of the samples, a xenon lamp ignition experimental system and a flame shape test system were designed, respectively. A thermogravimetry–differential scanning calorimetry–Fourier transform infrared spectroscopy combined thermal analysis system was used to study the thermal oxidation characteristics and analyze the gaseous products of the samples. The results indicate that B4C reduces the heat absorption at the beginning of the ignition, but subsequently prevents the rapid rise of sample temperature. During the stable combustion stage, the maximum flame length under optical density 10−4 (OD4) filter was 20.4 mm, and the maximum flame length under 580 nm + OD4 filters (represents the combustion of B element) was 16.7 mm. The samples contained a small amount of HBO2 and H3BO3, which led to slight mass loss during the low temperature section of the thermal oxidation process. During the high temperature section, the oxidation of B and B4C caused considerable mass gain. The gaseous products of the thermal oxidation process include CO2, CO, and H2O. In general, the B content of 60% was the most beneficial to decrease the oxidation temperature, increase the combustion intensity, and improve the heat-releasing ability of the samples.

Combustion synthesized boron carbide powders by different organic carbon sources and microwave absorbing properties

Molten-salt-assisted combustion synthesis of B4C powders with high specific area and their electromagnetic wave absorbing performance

Molten-salt-assisted combustion synthesis of B4C powders: Synthesis mechanism and dielectric and electromagnetic wave absorbing properties

High temperature stable, amorphous SiBCN microwave absorption ceramics with tunable carbon structures derived from divinylbenzene crosslinked hyperbranched polyborosilazane

Boron carbide amorphous solid with tunable band gap

Microstructure and microwave‐absorbing properties of B4C/C composite powders produced by combustion synthesis with an AC foaming agent

Preparation of Submicron Boron Carbide Powder Through Gas-Solid Reaction Method

Improving Effect of Boron Carbide on the Combustion and Thermal Oxidation Characteristics of Amorphous Boron

Co3O4 Nanoparticle-Modified Porous Carbons with High Microwave Absorption Performances

Honeycomb-like bamboo powders-derived porous carbon with low filler loading, high-performance microwave absorption

Preparation of novel carborane-containing boron carbide precursor and its derived ceramic hollow microsphere

Environmentally friendly bark-derived Co-Doped porous carbon composites for microwave absorption

Synthesis and Thermal Oxidation Resistance of Boron-Rich Boron-Carbide Material

The Hydrothermal Method of Preparing Boron–Saccharide Precursors for the Synthesis of Boron Carbide and Its Influence on the Morphology and Phase Composition of the Obtained Products

Combustion Synthesis of SiC/graphene Nanocomposites with Strong Microwave Absorption

Enhanced low-frequency microwave absorption of N-doped biomass derived carbon

Solvent-Free Synthesis of Ultrafine Tungsten Carbide Nanoparticles-Decorated Carbon Nanosheets for Microwave Absorption

Boron-doped helical carbon nanotubes: lightweight and efficient microwave absorbers

Novel Pathway for the Combustion Synthesis and Consolidation of Boron Carbide

Strong and Thermostable Boron-Containing Phenolic Resin-Derived Carbon Modified Three-Dimensional Needled Carbon Fiber Reinforced Silicon Oxycarbide Composites with Tunable High-Performance Microwave Absorption Properties

Cornstalk-derived macroporous carbon materials with enhanced microwave absorption