Microstructure and microwave‐absorbing properties of B4C/C composite powders produced by combustion synthesis with an AC foaming agent

Xiaoqian Zhou,Donghai Ding,Guoqing Xiao,Yan Mu,Boying Xing,Peilin Deng,Yanjie Zhang

DOI: https://doi.org/10.1111/ijac.14662

2024-01-20

International Journal of Applied Ceramic Technology

Abstract:To develop microwave‐absorbing properties of dielectric ceramics, B4C/C composite powders were prepared by combustion synthesis with B2O3, polyvinyl alcohol, and Mg as the raw materials in this work. The XRD, Raman, scanning electron microscope with energy‐dispersive spectroscopy, and VNA network analysis carried out the effects of the addition of azodicarbonamide (AC) foaming agent on the phase compositions, microstructure, and dielectric and microwave‐absorbing properties of the products. The results indicated that the addition of an AC foaming agent contributed to the formation of distinct morphologies with a larger specific surface area and uniform distribution of the free carbon in the B4C/C composite powders and improved its graphitization degree, which resulted in the formation of equivalent microcapacitors, enhanced interfacial polarization, improved conductive network, and leading to a low reflection loss (RL) and a broadened effective absorb bandwidth (EAB). Due to the dielectric loss as the dominant loss mechanism, C‐1.5 (1.5 wt.% AC foaming agent addition) exhibits the EAB of 3.02 GHz and the minimum RL (RLmin) of −22.90 dB at the thickness of 2.20 mm.

materials science, ceramics