Abstract:This paper reports a novel optical fiber-based microshear stress sensor utilizing a flexible membrane and double SU-8 resist structures as a moving micro-mirror, together with an optical fiber as a micro-Fabry-Perot interferometer. This sensor can be employed in air or liquid environments with high sensitivity because of its waterproof design. Through UV lithography processes on thick SU-8 resist, the roughness of the reflection surface has approached 7 nm (Ra value), suitable for optical applications. A single-mode optical fiber is employed for detecting the displacement of the floating element induced by shear stress. Tests have been carried out successfully and a detection possibility of 10 nm-displacement of the floating element and a displacement sensitivity of 0.128 nm/nm (spectrum shift/floating element displacement) has been demonstrated. The temperature coefficient of this fiber-optic sensor has been characterized to be 3.4 nm/K linearly from 25 to 48 degreesC. Fluid tests have also been performed by placing the sensor inside the inner wall of a precisely machined rectangular channel and the result shows a sensitivity of 0.4 nm/ml/min (spectrum shift/flow rate), corresponding to a shear stress resolution of 0.65 Pa/nm (shear stress/ spectrum shift). The minimum detectable shear stress is thereby estimated as 0.065 Pa from the reading resolution of the spectrometer of 0.1 mn, comparable to its counterparts with resolutions from 0.1-1 Pa.

An MEMS Optical Fiber Pressure Sensor Based on a Square Silicon Diaphragm: Numerical Simulation and Experimental Verification

An Optical Fiber Pressure Sensor Based on F-P Interferometry and Intensity Demodulation

Comparison of Measurements with Finite-Element Analysis of Silicon-Diaphragm-Based Fiber-Optic Fabry–Perot Temperature Sensors

Eccentric reflective optical fiber MEMS micro-pressure sensor

A Compact Optical MEMS Pressure Sensor Based on Fabry–Pérot Interference

A MEMS-Based High-Fineness Fiber-Optic Fabry–Perot Pressure Sensor for High-Temperature Application

Recent Progress in MEMS Fiber-Optic Fabry–Perot Pressure Sensors

MEMS pressure sensor based on optical Fabry–Perot interference

An optical fiber Fabry–Pérot micro-pressure sensor based on beam-membrane structure

Design and Simulation of Corrugated Diaphragm Applied to the MEMS Fiber Optic Pressure Sensor

A Five-Hole Pressure Probe Based on Integrated MEMS Fiber-Optic Fabry-Perot Sensors

High-Consistency Optical Fiber Fabry–Perot Pressure Sensor Based on Silicon MEMS Technology for High Temperature Environment

An Optical Fiber Fabry–Perot Pressure Sensor With Optimized Manufacturing Parameters

High Accuracy Pressure Sensor Based on Optical MEMS Technology

A Design of Optic Fiber Pressure Sensor Based on Micro In-Fiber Ellipsoidal Cavity

Polymer Mems-Based Fabry-Perot Shear Stress Sensor

A Large-Range and High-Sensitivity Fiber-Optic Fabry–Perot Pressure Sensor Based on a Membrane-Hole-Base Structure

Miniature Fiber Pressure Sensor Based on an In-Fiber Confocal Cavity

Silicon-on-Insulator Optical Waveguide Pressure Sensor Based on Mach-Zehnder Interferometer

High-precision optical fiber pressure sensor using frequency-modulated continuous-wave laser interference

Investigation by simulation of the highest sensitivity interferometric pressure sensor at the end of a micro-structured optical fiber