Abstract:An in-situ measurement system for porous alumina (PA) film based on atomic force microscope (AFM) in liquid and reflectometric interference spectroscopy (RIFS) was developed. The present article briefly discusses the principle and structure of the system, and introduces its unique characteristic. The system consists of probe unit, XY scanner, Z-piezo feedback system, computer and software, fiber optic spectrometer, anodization control circuitry etc. When a white light beam illuminates the surface of the film, the reflective light beams at the front and back side of the layer are coherent, and lead to periodical amplifications and extinction in the reflective spectrum with the information of the optical thickness of the film. A fiber optic spectrometer was applied in the system which input the refractive spectrum into the computer by which the optical thickness of the film was calculated. Meanwhile according to the surface topography of PA films by AFM in liquid, the effective refractive index was calculated based on Maxwell-Garnett theory and coherent potential approximation (CPA). So the thickness of PA films could be gained at last. To checkout the feasibility and stability of the system, the real-time scanning and thickness measurement experiments were done during anodization of Al sheets in oxalic acid aqueous solution. In the experiment, the authors used 25 mm diameter aluminum (Al) sheets with 99.999% purity and 0.4 mm thickness as the anode, and graphite rod as the cathode. The pretreatment-cleaned Al sheets were anodized in an aqueous solution of 0.5 mol x L(-1) oxalic acid at the constant temperature (20 +/- 0.2) degrees C with 20 mA x cm(-2) anodization electronic current density. Real-time AFM images of PA film were successfully obtained during anodization. The pore-ratios of Al sheet were 7.81% and 13.83% at oxidizing time 150 min and 180 min respectively. Correspondingly, the effective indexes were calculated to be 1.62 and 1.60, respectively. Combining the reflective spectrum gained by the fiber optic spectrometer, the wave number differences between the two adjacent extrema were 57.69 mm(-1) and 50.00 mm(-1). Based on reflectometric interference spectroscopy, the thickness of PA films was found to be 5.35 and 6.25 microm with oxidizing time 150 min and 180 min respectively. The system has characteristics of convenient manipulation, non-destructive and high-resolution in-situ measurement. And the surface morphology, pore-ratio and effective refractive index can also be gained at the same time.

Comparison Of Optical Surface Roughness Measured By Stylus Profiler, Afm And White Light Interferometer Using Power Spectral Density

Survey of measurement methods for surface roughness

Leaf surface roughness measure based on shape from focus

Roughness Characterization of Well-Polished Surfaces by Measurements of Light Scattering Distribution

A Measurement System for the Roughness of Ultra Smooth Surface with Large Aperture

Measurement of Aspheric Surface

Single-Shot White-Light Dispersive Interferometric Profilometer

Surface Profile Measurement of Micro-Optics by Using a Long Stroke Atomic Force Microscope

Modeling the Spatiotemporal Dynamics of Light and Heat Propagation for In Vivo Optogenetics.

A novel methodology to assess optical profilometer stability to discriminate surface roughness

Nanometer Scale Roughness Measurements with Atomic Force Microscopes

Non-Contact Surface Roughness Measurement by Implementation of a Spatial Light Modulator

Challenges in the areal measurement of surface roughness and shape at the micro and nanoscale

Real Time Measurement of Surface Roughness Using Laser Technique

Measurement of Device Surface Profile and Roughness

Characterization of randomly rough surfaces using angle-resolved scattering of light and atomic force microscopy

Comparison of two stylus methods for measuring surface texture

On how to determine surface roughness power spectra

A new optical technique for roughness measurement on moving surface

Study of In-Situ Measurement System for Porous Alumina Film Based on AFM and Reflectometric Interference Spectroscopy

Nanoscale surface roughness measurement based on frequency-domain interferometry principle