Two-dimensional approach for the numerical simulation of large bore reciprocating compressors thermodynamic cycle
Francesco Balduzzi,Andrea Tanganelli,Giovanni Ferrara,Alberto Babbini
DOI: https://doi.org/10.1016/j.applthermaleng.2017.10.041
IF: 6.4
2018-01-01
Applied Thermal Engineering
Abstract:The performance of large reciprocating compressors is strongly dependent on the geometry of gas chambers and valve pockets, both directly influencing the pressure losses along the flow path. Reliable and accurate numerical models are necessary for a proper prediction of the thermodynamic cycle of the compressor, hence of both the efficiency and the absorbed power. In order to account for the effect of the geometrical features, the detail level of the modeling technique needs to be suitable for capturing the most significant phenomena related to the physics involved. To this end, CFD simulations can represent a viable tool for the analysis of the working cycle. Due to the complexity of the geometry and the large extent of the fluid domain, unsteady three-dimensional CFD simulations are very demanding in terms of computational resources, resulting in unreasonably lengthy simulations and specialized hardware requirements.The present paper describes a two-dimensional CFD modelling strategy aimed at reducing the computational effort by ensuring a compromise between the accuracy of the results and the simulation costs. A simplified geometry is used to allow the reduction of the three-dimensional fluid domain to an equivalent two-dimensional representation. The suitability of using two-dimensional models for the numerical simulation of the thermodynamic cycle of large reciprocating compressors is analyzed and discussed. In the paper, the simulation results of a double-acting large bore cast iron cylinder are compared to experimental measurements. A satisfactory agreement was obtained when comparing the numerical data to the measurements of dynamic pressure sensors placed in the cylinder head, clearance volume adjustment plugs and suction and discharge nozzles. A comparison with the simulation results of low-order numerical models is also shown to highlight the enhancement in the performance predictability.The matching between experimental and simulated results, together with the short calculation time, confirms the high potential of the proposed solution in predicting the expected performance of the machine, in terms of indicated power and specific work. Moreover, additional benefits are related to the possibility of investigating the pressure oscillations and distributions in the cylinder chambers, and the mass flow rates for the analysis of the suction and discharge pipelines.
energy & fuels,engineering, mechanical,thermodynamics,mechanics