Abstract:The extreme sharpness for superhard micro mills is urgently needed to improve the surface quality, restrain size effect and suppress burr formation for the widely used miniature components. Therefore, laser cutting and precision grinding are coupled to form a hybrid method for the fabrication of diamond micro mills with extremely sharp edge. Firstly, the laser cutting simulation of polycrystalline diamond (PCD) based on various laser energy density and laser scanning speed was conducted to provide temperature distribution. Then the laser cutting experiments were conducted, and the influence of laser cutting parameters applied on the machining consequences (kerf width, cutting cycles, affected layer thickness, and surface roughness of cutting section) were analysed according to the simulation model. On this basis, the laser energy density and scanning speed were optimized as 175 J/cm 2 and 0.2 mm/s respectively to obtain the smooth and uniformly graphitized surface. Moreover, the grinding experiments were conducted on the cutting section obtained by the optimized laser parameters, the impact of the abrasive grain size, grinding depth per path and feeding speed on the grinding results were studied, these grinding parameters were optimized as 1 μm, 1 μm, and 2 mm/min to realise the micro abrasion during grinding process. In this way, PCD micro end mills (PCDMs) with surface roughness Sa of 57.3 nm, effective length of 600 μm, diameter of 400 μm, and radius of cutting edge of 0.19 μm were fabricated. Finally, the micro-milling experiments with PCDMs were performed on the Ti-6Al-4V material, the micro slots and thin-walled structure were processed with almost no burrs being observed and the obtained surface roughness Sa of 18.3 nm. With the obtained machining results, the remarkable cutting performance of PCDM was validated.

Mechanism and Techniques of Mechanical Lapping of Nature Diamond Cutting Tools' Nose Arc

Controllable Diamond Cutting of Structured Surfaces with Subnanometric Height Features on Silicon

An Edge Reversal Method for Precision Measurement of Cutting Edge Radius of Single Point Diamond Tools

An Ultra-Precision Tool Nanoindentation Instrument for Replication of Single Point Diamond Tool Cutting Edges

Study on Mechanism for Material Removal and Surface Generation by Molecular Dynamics Simulation in Abrasive Processes

Systematic Modeling and Rapid Control for Diamond Machining of Periodical Optical Surface

Tool Wear in Ultra-Precision Diamond Cutting of Non-Ferrous Metals with a Round-Nose Tool

Research of Surface Generation Mechanisms in Single-Point Diamond Turning

Characterization and Optimization of a Locally Boron-Doped Diamond Tool for Self-sensing of Cutting Temperature

Investigation on surface evolution and subsurface damage in abrasive lapping of hard and brittle materials using a novel fixed lapping tool

Ultra-Precision Machining: Cutting With Diamond Tools

Study on the effect of laser-assisted machining on tool wear based on molecular dynamics simulation

Formation mechanism and controlling technique for fabrication of extremely sharp diamond micro mills

On-machine measurement of tool nose radius and wear during precision/ultra-precision machining

Nanotwinned diamond cutting tool processed by femtosecond pulsed laser milling with trochoidal trajectory

On-Machine Diamond Tool Shaping to Realize Highly Efficient Ultraprecision Machining System

EXPERIMENTAL INVESTIGATION OF THE SURFACE TOPOGRAPHY IN TERMS OF PROCESS PARAMETERS DURING PICOSECOND LASER MACHINING OF POLYCRYSTALLINE DIAMOND

Study On The Control Of Surface Roughness In Single Point Diamond Turning

An Overview of Ultra-Precision Diamond Machining of Microstructured Freeform Surfaces

Investigation of Material Removal Distributions and Surface Morphology Evolution in Non-Contact Ultrasonic Abrasive Machining (NUAM) of BK7 Optical Glasses

Laser processing characteristics of PCD tool and modeling analysis