Abstract:This paper proposes a multistage method for burst leak localization through valve operations (VOs) and smart demand metering in district meter areas (DMAs) of water distribution systems (WDSs). Each stage includes partitioning of the DMA into two subregions using VOs and identification of potentially leaking pipes within the subregions through water balance analysis based on smart demand meters. Such a process is performed repeatedly (multiple stages) to narrow down the spatial range for pinpointing leak locations. To improve efficiency, a bisection optimization problem is formulated to localize the minimum leak areas using the lowest number of VOs, which is solved by a graph theory‐based method. The utility of the proposed method is demonstrated using two DMAs (DMA1 and DMA2) of a real WDS with different topological properties. Results show that the proposed method can efficiently localize artificial burst leaks in DMA1 within 7–15% of the total pipe length, implying that the proposed method is theoretically effective in localizing pipe burst leaks. The real application to DMA2 has identified two leak regions with 2.3 and 4.2 km of pipe length (around 3–6% of the entire DMA2) using 18 VOs. These two burst leaks have been subsequently confirmed and pinpointed using listening rods by practitioners of the local water utility. These results indicate that the proposed multistage method is effective and efficient for burst leak localization, which can be promising for wide practical applications due to rapid developments of smart WDSs (e.g., smart demand meters or control valves).

Minimal Time Of Valve Closure For Fluid Transient In Water Transmission

Water Hammer Suppression with Variable Terminal Time via PDE-Constrained Dynamic Optimization

Water hammer mitigation via PDE-constrained optimization

Research on the stable time of hydraulic transients in the process of adjusting flow on the water transmission pipelines

Optimal boundary control for water hammer suppression in fluid transmission pipelines

Efficient Leak Localization in Water Distribution Systems Using Multistage Optimal Valve Operations and Smart Demand Metering

Transient Flow Dynamics Behaviors During Quick Shut-off of Ball Valves in Liquid Hydrogen Pipelines and Storage Systems

Optimization of Closing Ways of Slow Closing Check Valve by Accidental Pump-Stop in Pressure Water Supply Pipeline

THE TRANSIENT CHARACTERISTICS ANALYSIS OF PUMP DURING RAPID VALVE OPENING AND CLOSING

Three-dimensional computational fluid dynamics simulation of valve-induced water hammer

Sensitivity Analysis of Operational Time Differences for a Pump–Valve System on a Water Hammer Response

Experimental and numerical study on pressure transient created by periodical fast switch valve in hydraulic transmission system

Dynamic characterization of water hammer in gangue fly ash slurry pipelines during valve closure

Multi-Objective Optimal Design of Water Distribution Networks Accounting for Transient Impacts

Research on Air Valve of Water Supply Pipelines

Transient Simulation of Valve Core Movement of Pilot-Control Globe Valve in Vertical Pipelines

Transient Analysis of the Gas-Liquid Two Phase Flow in Long-Distance Water Pipelines

Dynamic Interaction Between Valve-Closure Water Hammer Wave and Centrifugal Pump

EXPERIMENTAL STUDY ON PRESSURE TRANSIENTS WITH CAVITATION IN LOW PRESSURE WATER-HYDRAULIC PIPELINE

Computational Optimal Boundary Control for Water Pressure Suppression Arising in a Fluid Flow System Modeled by Hyperbolic PDEs

A Novel Surge Damping Method for Hydraulic Transients with Operating Pump Using an Optimized Valve Control Strategy