Abstract:A fixed-slope soft-start method applicable to Buck converters for on-chip integration is proposed to address the issue of varying power stresses (device voltage, current stress) during start-up with different output voltages. The main mechanism involves combining feedback coefficient sampling with a fixed-slope reference voltage to achieve a slow rise in the reference voltage by equating the soft-start charging current to a pulse current through the on-chip integration of a small capacitor. This allows for fixed-slope start-ups for different set output voltages. Spike elimination techniques are employed to address charging current spikes caused by pulse periods, enhancing precise control over the soft-start time. By replacing the traditional resistor divider network with a capacitive divider network in the soft-start method, DC power consumption is minimized. Upon completion of the soft start, a smooth transition to a steady-state operation occurs, with the automatic shutdown of the soft-start module reducing static power consumption. A specific circuit design and layout verification based on 0.18 μm high-voltage BCD technology demonstrates that the proposed method maintains a fixed-slope start-up of approximately 5 mV/μs within the chip's output range of 0.9 V to 4 V, with a slope control accuracy of up to 98%. The soft-start circuit effectively eliminates surge currents generated during start-up under full load conditions of 3 A and no-load conditions of 0 A, reducing the overall surge current by 44% and enabling a stable voltage rise and the smooth transition to a steady-state operation.

On-chip soft-start cell for DC-DC converter

A Novel Digital Soft-Start Circuit for DC-DC Switching Regulator

Research on Fixed-Slope On-Chip Soft-Start Method Applied to Buck DC–DC Converter

A Novel Soft-Switching and Low-Conduction-loss Bidirectional DC-DC Converter

Soft-Start Method With Small Capacitor Charged by Pulse Current and Gain-Degeneration Error Amplifier for On-Chip DC–DC Power Converters

Soft-switching three-phase matrix based isolated AC-DC converter for DC distribution system

Soft-Switching Single-Stage Current-Fed Full-Bridge Isolated Converter for High Power Ac/Dc Applications

Ramp-based soft-start circuit with soft-recovery for DC-DC buck converters

Research on digital soft start method of boost DC-DC switching power supply

Soft Start-up Control Strategies of Bi-Directional Converter with High Voltage Ratio

Design Considerations of Soft-Switched Buck PFC Converter With Constant On-Time (COT) Control

A Novel Soft-Start Circuit for DC/DC Switching Regulator Using Voltage Compensation Technique

Minimized start-up transient and initial inrush current of boost converter for LED lighting

An Asynchronous Start Mode Suitable For Dc-Dc Converters In Parallel

A DC-DC Converter with Switched-Capacitor Delay Deadtime Controller and Enhanced Unbalanced-Input Pair Zero-Current Detector to Boost Power Efficiency

A New Coupled-Inductor-Based High-Gain Interleaved DC-DC Converter With Sustained Soft Switching

High Step-Up/Step-Down Soft-Switching Bidirectional Dc-Dc Converter With Coupled-Inductor And Voltage Matching Control For Energy Storage Systems

An Optimized Soft‐start Procedure of Dual Active Bridge Converter for Charging Current Suppression

An Improved Hiccup Mode Short-Circuit Protection Technique With Effective Overshoot Suppression for DC–DC Converters

VRSPV Soft-Start Strategy and AICS Technique for Boost Converters to Improve the Start-Up Performance

A Soft Startup Method with Natural Short-Circuit Tolerance Features for CLLC Converters