Abstract:A new current-driven soft-switched full-bridge converter is presented in this paper. By connecting a switched-capacitor snubber in parallel with the primary winding of the coupling transformer, all main switches are zero-current-switched (ZCS) and the switches in the snubber are zero-voltage-switched (ZVS). The proposed converter has the following key features. First, the transformer leakage inductance is utilized as a part of the resonant circuit for the soft-switching actions. Second, the snubber capacitor voltage is adaptively controlled: the capacitor is charged to the minimum necessary energy for switching the main switches at zero current, depending on the actual value of the input/load current. Thus, less resonant energy is circulated. Third, there is no extra voltage stress on the switches and the current through the switches is limited to the value of the input current. Consequently, the conduction losses are kept minimum. The cyclical switching operation and control of the converter are described. A tradeoff design of the snubber circuit is given: the requirement of reducing the duration of the resonant intervals for minimizing the duty-cycle loss is superimposed on the requirement of getting ZCS for a very large range of the line voltage and load. A 530-V/15-kV, 5-kW prototype has been built and evaluated. The experimental results confirmed the theoretical predictions. A comparative study on the converter efficiency with and without the proposed snubber circuit is given, showing the superiority of the proposed solution.

Current-Feed Single-Switch Forward Resonant DC Transformer (DCX) with Secondary Diode-Clamping.

A novel current-feed soft-switching two-switch forward resonant DC-DC Transformer (DCX)

A Soft-switching Universal-input Solid State Transformer

A New ZVCS Resonant Voltage-Fed Push-Pull Converter for Vehicle Inverter Application

A GaN-based Single-switch Forward Resonant DCX With ZVZCS Winding-clamping

Active-Clamp ZVZCS Resonant Forward DC Transformer (DCX) with Load-Adaptive ON-Time Control

A Novel Soft-Switching and Low-Conduction-loss Bidirectional DC-DC Converter

Soft-Switching Single-Stage Current-Fed Full-Bridge Isolated Converter for High Power Ac/Dc Applications

Zero-Voltage-Switching SiC-MOSFET Three-Phase Four-Wire Back-to-Back Converter

Research of an Active Clamping Current-fed Half-bridge Converter with Input Parallel and Output Series

MHz Level Two-Stage ZVS DC-DC Converter with Wide Input and Output Voltage Ranges

A Single-Switched High-Switching-frequency Quasi-Resonant Flyback Converter with Zero-Current-switching and Valley-Switching

A Hybrid ZVS Full-Bridge Converter with Transformer Winding Series-Parallel Auto Regulated Current Doubler Rectifier

A Family of DC Transformer (DCX) Topologies Based on New ZVZCS Cells with DC Resonant Capacitance

1 MHz 48–12 V Regulated DCX with Single Transformer

An Active-Clamping Current-Fed Push-Pull Converter For Vehicle Inverter Application And Resonance Analysis

A Novel ZVS DC/DC Converter for High Power Applications

Interleaved High Step-Up Converter with Coupled Inductor and Blocking Capacitor

A Novel ZVZCS Asymmetrical Dual Switch Forward Converter with an Optimized ZCS Cell Based on Active Clamp Reset Technique

A ZCS Full-Bridge Converter Without Voltage Overstress on the Switches

A New Zero Voltage Switching Boost Dc-Dc Converter with Active Clamping