Abstract:We present a neural stimulator chip with an output stage (electrode driving circuit) that is fail-safe under single-fault conditions without the need for off-chip blocking-capacitors. To miniaturize the stimulator output stage two novel techniques are introduced. The first technique is a new current generator circuit reducing to a single step the translation of the digital input bits into the stimulus current, thus minimizing silicon area and power consumption compared to previous works. The current generator uses voltage-controlled resistors implemented by MOS transistors in the deep triode region. The second technique is a new stimulator output stage circuit with blocking-capacitor safety protection using a high-frequency current-switching (HFCS) technique. Unlike conventional stimulator output stage circuits for implantable functional electrical stimulation (FES) systems which require blocking-capacitors in the microfarad range, our proposed approach allows capacitance reduction to the picofarad range, thus the blocking-capacitors can be integrated on-chip. The prototype four-channel neural stimulator chip was fabricated in XFAB's 1-mum silicon-on-insulator CMOS technology and can operate from a power supply between 5-18 V. The stimulus current is generated by active charging and passive discharging. We obtained recordings of action potentials and a strength-duration curve from the sciatic nerve of a frog with the stimulator chip which demonstrate the HFCS technique. The average power consumption for a typical 1-mA 20-Hz single-channel stimulation using a book electrode, is 200 muW from a 6 V power supply. The silicon area occupation is 0.38 mm(2) per channel.

A Mosfet-Only Delta-Sigma Modulator for Implantable Neural Signal Sensors

Optimal Design of a Low-Power, Phase-Switching Modulator for Implantable Medical Applications.

A 10.7-Μa 103-Db DR Hybrid Delta-Sigma Modulator for Sensing Applications

Ultra-low Power MOSFET-only Micromation Multi-Bit Quantizer for Implantable Neural Applications

Modeling of a 200 KHz Bandwidth Low-pass Switch-capacitor Sigma-delta DAC with a Raised Spur-free Modulator

A 153μw 26nv/√hz Readout Circuit with BW and Power Scalability Using Capacitively-Coupled Chopper Floating Inverter Amplifier Embedded in a Discrete-Time ΔΣ Modulator

A 65-Nm Low-Noise Low-Cost ΣΔ Modulator for Audio Applications

Low-power High-Linearity Sigma-Delta Modulator for Audio Applications

A Closed-Loop Sigma Delta Modulator For Micromechanical Capacitive Sensors

A High Performance Delta-Sigma Modulator for Neurosensing

A 0.6V 19.5μw 80db DR ΔΣ Modulator with SA-Quantizers and Digital Feedforward Path

A 0.6V 19.5 mu W 80 dB DR Delta Sigma Modulator with SA-Quantizers and Digital Feedforward Path

A 113.6 dB SNR 300μW Switched-Capacitor ΣΔ Modulator with Full-Scale Input Range

A 3 Rd-Order 1-Bit Σ-Δ Modulator with a 2-Tap FIR Fi Lter Embedded

A Low-Power Opamp-Less Second-Order Delta-Sigma Modulator for Bioelectrical Signals in 0.18 µm CMOS

A 0.8-V 1.7-Μw25.9-fj Continuous-Time Sigma-Delta Modulator for Biomedical Applications.

A 16-bit 312.5-kHz bandwidth fourth-order one-bit switched-capacitor sigma-delta modulator

A 0.25V 97.8fJ/c.-s. 86.5dB SNDR SC Delta Sigma Modulator in 0.13 mu m CMOS

A Low-power High-resolution Sigma-Delta Modulator

A 112db SNDR Delta-Sigma Modulator for Low-Power Audio Applications

An Integrated Implantable Stimulator That is Fail-Safe Without Off-Chip Blocking-Capacitors