A 10.7-Μa 103-Db DR Hybrid Delta-Sigma Modulator for Sensing Applications
Huizhu Zhang,Xinjie Wu,Zhong Tang,Nianxiong Tan,Xiaopeng Yu,Zhenghao Lu
DOI: https://doi.org/10.1002/cta.4303
IF: 2.378
2024-01-01
International Journal of Circuit Theory and Applications
Abstract:This paper reports a low-power, high dynamic range second-order delta-sigma modulator (DSM) for sensing applications. The DSM employs a hybrid CIFF-B topology, consisting of a continuous-time first stage and a discrete-time second stage. The first stage is an OTA-based RC integrator with inherent anti-aliasing properties, while the second stage is a switched-capacitor integrator. Offset and 1/f noise in the first stage are mitigated by the chopper-stabilization technique, while those in the second stage are suppressed through the gain provided by the first stage. Furthermore, the OTA-sharing technology is utilized in the second stage to realize signal addition before quantization, reducing design complexity. The hybrid DSM prototype is fabricated with a 180-nm CMOS process and occupies an area of 0.123 mm(2). Measurement results show peak SNDR/SNR/SFDR values of 95.8, 97.1, and 102.8 dB, respectively, with a current consumption of 10.7 mu A from a 1.8-V single supply. The reported DSM achieves a 103-dB dynamic range in a 100-Hz signal bandwidth, corresponding to a Schreier figure-of-merit (FoMs) value of 170.2 dB.