Abstract:Sandwich structures and porous materials have been applied widely in various fields due to their excellent mechanical performance, and multifunctional composites will have a significant engineering demand in the future. Studying damped composites' mechanical properties and failure forms has significant engineering value and significance. However, the current connecting processes for sandwich panels and porous materials must be improved. Therefore, to explore the ambiguity of the connection interface between the core material and panel in sandwich panels, as well as the mechanical properties of such structures, a sandwich panel with a metal rubber core material was prepared using vacuum brazing and cementing processes. Microscopic examinations using scanning electron microscopy and energy-dispersive spectroscopy were conducted to observe the physical bonding mechanism at the interface of the sandwich panel. The results indicate that the brazed sandwich panels exhibited a more uniform and continuous interface than the cemented sandwich panels. This work designs three-point bending compression experiments to investigate the effects of core material thickness, density, and preparation process on the bending mechanical properties of the sandwich panel. Failure modes of the sandwich panel during the experiments are analyzed. The experimental results show that the failures of the brazed sandwich panels are attributable to the bending deformation of the panel and the shear failure of the metal wire core material. The cemented sandwich panels exhibit separation failures in the area below the indenter and at both ends of the panel. The core material's thickness and density significantly influence the bending performance of the sandwich panels. An increase in the core material's thickness and density effectively enhances the sandwich panels' peak load and energy absorption capacity.

Experimental study on the mechanical properties of sandwich composite reinforced by bias stitching and Z-pin inserting

Effect of Ø 0.11 Mm Z-pinning on the Properties of Composite Laminates Via an Ultrasound Guided Insertion Process

Strengthening of Composite T-joints Using Ø 0.11 Mm Z-pins Via an Ultrasound-Guided Insertion Process

A Novel Method for Through-Thickness Reinforcement of Laminated Composites Using Discrete Micro-Polarization-induced Fiber Injection (DMFI) Approach

Effects of stitching parameters on the flexural properties of stitched foam core sandwich composites

Experimental Investigation of Z-pin Insertion Angles on the Mechanical Behavior and Failure Mechanism of Compression after Impact for CFRP Laminates

Experimental Investigation of 3d Sandwich Structure with Core Reinforced by Composite Columns

Investigation and prediction of laminate quality and interlaminar mechanical performance of the tufted sandwich composites with different core structures

Effect of an S-shaped reinforced core on the compression properties of composite honeycomb sandwich panel and tube structures

Experimental and Numerical Studies on Core Stiffened Sandwich Composite Panel

Design and optimization of composite sub-stiffened panels

Influence of Z‐pin material on the mechanical properties of fine Z‐pin reinforced composites

Experimental Investigation of the Three-Point Bending Property of a Sandwich Panel with a Metal Rubber Core

Experiment and Analysis on Mechanical Properties of Stitched Laminates

Shear Stiffness Prediction of Stitched Composite Sandwich Structure with Foam Core

Experimental research on shear property of foam core sandwich composite panels with enhanced interface

The Effects of Core Machining Configurations on the Mechanical Properties of Cores and Sandwich Structures

Effect of stitching angle on mechanical properties of stitched sandwich panels

Experimental study on the stitching reinforcement of composite laminates with a circular hole

Mechanical behaviours of composite sandwich panel with strengthened pyramidal truss cores

Experimental and Numerical Analysis of Nonlinear Flexural Behaviour of Lattice-Web Reinforced Foam Core Composite Sandwich Panels