Abstract:Sandwich structures and porous materials have been applied widely in various fields due to their excellent mechanical performance, and multifunctional composites will have a significant engineering demand in the future. Studying damped composites' mechanical properties and failure forms has significant engineering value and significance. However, the current connecting processes for sandwich panels and porous materials must be improved. Therefore, to explore the ambiguity of the connection interface between the core material and panel in sandwich panels, as well as the mechanical properties of such structures, a sandwich panel with a metal rubber core material was prepared using vacuum brazing and cementing processes. Microscopic examinations using scanning electron microscopy and energy-dispersive spectroscopy were conducted to observe the physical bonding mechanism at the interface of the sandwich panel. The results indicate that the brazed sandwich panels exhibited a more uniform and continuous interface than the cemented sandwich panels. This work designs three-point bending compression experiments to investigate the effects of core material thickness, density, and preparation process on the bending mechanical properties of the sandwich panel. Failure modes of the sandwich panel during the experiments are analyzed. The experimental results show that the failures of the brazed sandwich panels are attributable to the bending deformation of the panel and the shear failure of the metal wire core material. The cemented sandwich panels exhibit separation failures in the area below the indenter and at both ends of the panel. The core material's thickness and density significantly influence the bending performance of the sandwich panels. An increase in the core material's thickness and density effectively enhances the sandwich panels' peak load and energy absorption capacity.

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is to study the mechanical properties and failure modes of sandwich plates with metal - rubber core materials in the three - point bending test. Specifically, the author focuses on the following aspects: 1. **Uncertainty of the connection interface**: Current connection processes for sandwich plates and porous materials are insufficient, especially there is ambiguity in the performance of the connection interface. Therefore, in this paper, sandwich plates with metal - rubber core materials are prepared by vacuum brazing and bonding processes, and the physical bonding mechanism of the interface is observed by scanning electron microscopy (SEM) and energy - dispersive spectroscopy (EDS). 2. **Influencing factors of mechanical properties**: Study the influence of core material thickness, density and preparation process on the bending mechanical properties of sandwich plates. The experimental results show that increasing the thickness and density of the core material can effectively improve the peak load and energy absorption capacity of the sandwich plate. 3. **Failure mode analysis**: Analyze the failure modes of sandwich plates in the three - point bending test. The experimental results show that the failure of brazed sandwich plates is mainly attributed to the bending deformation of the panel and the shear failure of the wire - core material; while the bonded sandwich plates have separation failures below the indenter and at both ends of the panel. ### Specific problems and solutions - **Optimization of the connection interface**: In order to improve the performance of the connection interface of sandwich plates, two processes, vacuum brazing and bonding, are adopted. Research shows that the interface of brazed sandwich plates is more uniform and continuous. - **Improvement of mechanical properties**: By adjusting the thickness and density of the core material, the mechanical properties of sandwich plates can be significantly improved. Specifically, it shows higher peak load and stronger energy absorption capacity. - **Understanding of failure modes**: Through three - point bending tests on sandwich plates with different preparation processes, their failure modes are analyzed in detail. This provides an important reference for subsequent design and application. ### Summary This research provides an experimental basis and scientific guidance for the application of sandwich plates with metal - rubber core materials in fields such as vibration damping, and has important engineering value and significance. In particular, the research reveals the influence of different preparation processes on the mechanical properties and failure modes of sandwich plates, providing theoretical support for further optimizing the structural design and improving the interface quality.

Experimental Investigation of the Three-Point Bending Property of a Sandwich Panel with a Metal Rubber Core

Research on Bending Properties of Metal Faced-composite Core Sandwich Panel

Three-point bending behaviors of the foam-filled CFRP X-core sandwich panel: Experimental investigation and analytical modelling

Experimental and Numerical Studies on Core Stiffened Sandwich Composite Panel

Experimental and Theoretical Study of Sandwich Panels with Steel Facesheets and Gfrp Core

Mechanical performances of metal-polymer sandwich structures with 3D-printed lattice cores subjected to bending load

On the mechanical performance of honeycomb-core sandwich L-joint under bending load: an experimental-numerical study

Experimental Investigation of 3d Sandwich Structure with Core Reinforced by Composite Columns

Mechanical Properties of Sandwiched Construction with Composite and Hybrid Core Structure

Flexural property study of multiaxial fiber reinforced polymer sandwich panels with pultruded profile cores

Study on damage failure for a new double-triangular truss core sandwich structure

Exploring bending behavior of curved sandwich panels with three-dimensional printed, functionally graded cores

Novel panel-core connection process and impact behaviors of CF/PEEK thermoplastic composite sandwich structures with truss cores

Multi-point forming of sandwich panels with egg-box-like cores and failure behaviors in forming process: Analytical models, numerical and experimental investigations

Experimental and numerical research on flexural behavior of fiber metal laminate sandwich composite structures with 3D woven hollow integrated core

Failure behavior and damage model of composite sandwich panels under three-point bending fatigue load

Transverse Bending and Axial Compressing Mechanical Characteristics of Carbon Fiber Reinforced Plastic Sandwich Laminated Square Tubes

An investigation on the mechanical behaviour of sandwich composite structures with circular honeycomb bamboo core

Effect of an S-shaped reinforced core on the compression properties of composite honeycomb sandwich panel and tube structures

Quasi-static three-point bending of sandwich panels with Miura-ori cores

Experimental Study of the Bending Properties and Deformation Analysis of Web-Reinforced Composite Sandwich Floor Slabs with Four Simply Supported Edges