Abstract:This study aims to solve the problem of springback control of aluminum alloy components in the rolling process, and the method of combining experiment and simulation is adopted. Firstly, a series of aluminum alloy samples are designed, and the four-axis flexible bending machine is used for precision roll bending. Secondly, the three-dimensional (3D) shape change data of the workpiece before and after roll bending is monitored and recorded in real-time by a high-precision 3D scanner. Meanwhile, aiming at different rolling process parameters of each group (including roll bend speed, feed rate, pre-deformation amount, mold curvature radius, and other factors), advanced finite element software is used to carry out detailed simulation and calculations. In addition, the coincidence is compared and analyzed between the actual experiment results and the simulation prediction. The stress-strain distribution and springback evolution of aluminum alloy during roll bending are described accurately. The experimental and simulation results show that the springback rate of aluminum alloy fluctuates in the range of 5% to 15% after four-axis flexible roll bending, and the specific springback value is influenced by various process parameters. For example, under the premise of keeping other conditions unchanged, when the roll bending speed is increased from 30mm/s to 60mm/s, the springback rate shows an upward trend of about 3%. By increasing the feed rate by 20%, an average decrease of about 7% in springback quantity is observed. It can be seen that the increase in roll bending speed can aggravate the springback phenomenon, and the appropriate increase in feed rate can play a certain role in restraining the springback. Further analysis shows that the choice of the mold curvature radius and pre-deformation amount also has a decisive influence on the springback characteristics. There is a nonlinear relationship between the two parameters and the amount of springback. Changing these two parameters in a specific range can effectively regulate the springback effect.

Influences of Forming Speed and Storing Time on Springback Characteristics of Laminated Sheet Metal Bent Part

Experimental and Numerical Analysis of V-bend and Springback of Laminated Steel Sheet

Study on bending springback behavior of laminated steel sheet

Experiment and Numerical Simulation of Springback of Laminated Steel Sheet in U-channel Forming Process

Investigation on V-Bending and Springback of Laminated Steel Sheets

Study on Process Parameters and Springback Rule for Stamping of High Strength Steel Sheet

An Analytical Model for Predicting Sheet Springback after V-bending

Size Effect Affected Springback in Micro/meso Scale Bending Process: Experiments and Numerical Modeling

Study on the Influencing Factors and Forming Process Selection of Sheet Metal Bending Spring Back Defects

Study of Multi-circle Auto Panel Forming Spring-back

Optimization of Process Parameters of U-Shape Sheet Metal Based on Compensation of Geometric Springback Value

Investigation on the TRIP Steel Sheet Forming Processes with respect to Punch Speed Loading-Paths

Springback characteristics and influencing laws of four-axis flexible roll bending forming for aluminum alloy

Influences of the Evolving Plastic Behavior of Sheet Metal on V-bending and Springback Analysis Considering Different Stress States

Experimental study and numerical simulation on springback of Ti-6Al-4V alloy under hot U-bending

Analysis of Mechanism of Springback in 22MnB5 Super-high Strength Steel Forming

Sensitivity Analysis of Effect of Material Properties to Spring-back of High Strength Steel

Research on springback characteristic in flexible multi-points 3D stretch-bending process

The Control of Springback for Forming of Advanced Ultra High Strength Martensitic Steel

Investigation on Springback Behavior of Cu/Ni Clad Foils During Flexible Die Micro V-Bending Process

Numerical Study Of Springback Laws In Metal Forming Of Diaphragm Of Automotive Horn