Abstract:Microforming using a small machine (or so-called desktop machine) is an alternative new approach to those using full-size heavy equipment for manufacturing microparts. Microparts are commonly defined as parts or structures with at least two dimensions in the submillimeter range, which are used extensively in electronics and micromechanical products. However, when scaling down a conventional forming process to microscale, the influence of the so-called size effect needs to be considered. The individual microstructure (size, shape, and orientation of grains) and the interfacial conditions show a significant effect on the process characteristics. In this paper, the process of extrusion is investigated to establish it as a viable process for microforming. A forming assembly is fabricated and used in conjunction with a loading substage to extrude micropins with a final diameter of 1 mm. The effect of grain size is investigated by using workpieces heat treated to produce grain sizes varying from 32 μm up to 211 μm. Two extrusion dies with different roughness are used to study the effect of surface finish. While experiments lead to interesting questions and new discoveries, theoretical or numerical solutions are necessary tools for process optimization. Here, knowing the limits of the current widely used numerical simulation tools [i.e., the Finite Element Method (FEM)], a new method, the Reproducing Kernel Element Method (RKEM), has recently been developed to address the limitations of the FEM (for example, remeshing issue), while maintaining FEM’s advantages, e.g., the polynomial reproducing property and function interpolation property. The new RKEM method is used to simulate the microextrusion problem. Its results are compared with that obtained from the FEM and the experiment result. Satisfactory results were obtained. Future directions on the experimental and simulation work are addressed.

Design and Implementation of the Micro-Extrusion Forming System

Design and Experiment Study of Micro-extrusion Forming System Based on Piezoelectric Actuator

Experimental Study of High-Frequency Vibration Assisted Micro/Mesoscale Forming of Metallic Materials

Research on the Precision Microforming Apparatus

Micro Pin Extrusion of Metallic Materials Assisted by Ultrasonic Vibration

Research on the Control System for Superplastic Micro-Extrusion Forming

Research on Microforming Technology of Microgears

Design and Development of Ultrasonic Assisted Micro Forming System

Design of an ultrasonic-assisted micro extrusion forming system

Development of a Micro-Forming System for Micro-Punching Process of Micro-Hole Arrays in Brass Foil

Hot micro-extrusion experimentation and die design

Micro -Parts Massive Production Technology Based on Micro -Forming

Research on Precision Blanking Process Design of Micro Gear Based on Piezoelectric Actuator

Microforming: Experimental Investigation of the Extrusion Process for Micropins and Its Numerical Simulation Using Rkem

Experiments And Numerical Simulation Of Micro Gears In Micro Injection Molding

Study on compound fabrication process of micro double gears using microforming

An Advanced Superplastic Sheet-Forming Machine Controlled by Microcomputer

Experimental Investigation on Pressure Variation During Plastic Micro-Extrusion

Experimental Study on Effect of Thermal Deformation Parameters on Forming Process of Microgears

Study on the Size Effect and the Effect of the Friction Coefficient on the Micro-extrusion Process

Study on Simulation and Experiment of Micro Sheet Metal Forming