Abstract:The anodic polarization response of magnesium alloy AZ31 was first characterized during exposure to aerated 0.1 M NaCl solutions with millimolar additions of NaVO3, Na3PO4, Na2HPO4, NaF and various pairings to assess their ability to inhibit corrosion kinetics and retard localized corrosion. Each of the candidate inhibitors reduced the corrosion rate of the alloy to some degree. A Na3PO4–NaVO3 pair produced a good inhibiting effect decreasing the corrosion rate to about 10−7 A/cm2, which was two orders of magnitude lower than the uninhibited control case. A Bliss Independence assessment indicated that this inhibitor pair acted synergistically. A Na2HPO4–NaVO3 pair reduced the corrosion rate to 10−6 A/cm2 but was not assessed to be acting synergistically. The NaVO3–NaF pair did not reduce the corrosion rate significantly compared to the control case and was an antagonistic pairing. SEM imaging showed film formation due to exposure, which appears to be the origin of the observed inhibition. The resistance to localized corrosion was assessed as the difference in the breakdown potential and the corrosion potential, with larger values indicating a lower probability of localized corrosion during free corrosion exposures. The effects of the inhibitors on this characteristic were mixed, but each of the inhibitor pairs yielded potential differences in excess of 100 mV. A conceptual conversion coating process based on a mixture of vanadate and phosphate compounds were demonstrated. A fluoride-bearing formulation produced coatings whose total impedance was increased by a factor of two compared to an uncoated control. A fluoride-free formulation produced coatings whose corrosion resistance was increased by more than a factor of three.

Corrosion Inhibition Effect of Cerium Nitrate on Magnesium Alloy in Ammonium Nitrate Solution

Effect of organic component (tartrate) addition on cerium nitrate's ability to inhibit corrosion of mild steel in NaCl solution

Corrosion resistance of anodically oxidized LY12 aluminum alloy after modification with cerium nitrate and silane

PREPARATION AND CORROSION ELECTROCHEMISTRY BEHAVIOR OF CERIUM-BASED CHEMICAL CONVERSION COATING ON AZ91 MAGNESIUM ALLOY

Changes of Corrosion Electrochemical Behavior of Cerium Nitrate Doped GPTMS/TEOS Silane Hybrid Films with Immersion Time

The effect of selected corrosion inhibitors on localized corrosion of magnesium alloy: the expanded understanding of "inhibition efficiency"

EFFECT OF CERIUM AND LANTHANUM ALLOYING ON MICROSTRUCTURE AND CORROSION BEHAVIOR OF AZ91 MAGNESIUM ALLOY

Analysis of the Ce(III) chloride, Ce(III) nitrate, and Ce(III) propionate as corrosion inhibitor of the aluminum alloys in NaCl solution

Lithium Carbonate and Oxalate Salts as Corrosion Inhibitors for Magnesium Alloy AZ31 B in NaCl Solution

Inhibition effect of calcium as an alloy element of aluminum and its cooperative effect with tartrate in an alkaline solution

Effect of cerium nitrate concentration on corrosion protection of hybrid organic/inorganic Si/Zr sol-gel coating applied on hot-dip galvanized steel

The Effect of Vanadate, Phosphate, Fluoride Compounds on the Aqueous Corrosion of Magnesium Alloy AZ31 in Dilute Chloride Solutions

THE INHIBITION EFFECT OF ZINC AND SILICATE IONS ON PITTING CORROSION INDUCED BY CERIUM(III) IONS OF CARBON STEEL IN SODIUM CHLORIDE SOLUTION

Corrosion protection properties of different inhibitors containing PEO/LDHs composite coating on magnesium alloy AZ31

INHIBITION EFFECT OF LITHIUM NITRATE ON CARBON STEEL CORROSION IN HIGH CONCENTRATION LITHIUM BROMIDE SOLUTION AT 173°C

Effect of the Sodium Silicate Inhibitor on the Corrosion Protection of AZ31 Magnesium Alloy

Effect of cerium on the anodic corrosion of Pb–Ca–Sn alloy in sulfuric acid solution

Corrosion resistance and electrical conductivity of V/Ce conversion coating on magnesium alloy AZ31B

EFFECT OF CERIUM ON THE ELECTRONIC PROPERTY OF PASSIVE FILM FORMED ON Fe-3Cr ALLOY

Effect of Ce on the localized corrosion behavior of non-equiatomic high-entropy alloy Fe40Mn20Cr20Ni20 in 0.5 M H2SO4 solution

Inhibitive effect of sodium carbonate on corrosion of AZ31 magnesium alloy in NaCl solution